plantronics voyager headset bluetooth pairing to computer

Plantronics Bluetooth Pairing Mode: A Step-by-Step Guide

Putting your Plantronics Bluetooth into pairing mode is a breeze! All you need is your Bluetooth device, and in a few simple steps, you’ll be ready to connect it to your phone, tablet, or computer. Just make sure your device is charged, and you’re good to go!

Step by Step Tutorial: Putting Your Plantronics Bluetooth in Pairing Mode

Before we dive into the steps, let’s quickly discuss what we’re about to do. Pairing mode is what allows your Bluetooth device to be discoverable by other devices. This is essential for establishing a connection.

Step 1: Turn on your Plantronics Bluetooth

Press and hold the power button until the light indicator turns on.

When you turn on your Plantronics Bluetooth, you might notice a light indicator. For most models, this light will flash blue and red when your device is in pairing mode. If it doesn’t, don’t worry! We’ll get there in the next step.

Step 2: Activate Pairing Mode

Hold the power button down for 5-6 seconds until the light indicator starts flashing blue and red.

After you’ve turned on your device, keep holding down the power button. You’ll know you’re in pairing mode when the light flashes blue and red. This is your device’s way of saying, “Hey, I’m ready to pair with something!”

Step 3: Keep the Device in Pairing Mode

Wait for your other device to discover your Plantronics Bluetooth.

Once your Bluetooth is in pairing mode, grab the device you want to pair it with. It could be your phone, laptop, or tablet. Go to the Bluetooth settings on that device, and it should find your Plantronics Bluetooth listed there.

After you’ve completed these steps, your Plantronics Bluetooth will pair with your device, and you’ll be ready for hands-free calling, listening to music, or whatever else you need your Bluetooth for!

Tips: Enhancing Your Pairing Experience

• Make sure your Plantronics Bluetooth is charged before you try to pair it.
• Keep the Bluetooth and the device you’re pairing it with close to each other.
• If your Bluetooth doesn’t go into pairing mode, try resetting it according to the user manual.
• Make sure your other device’s Bluetooth is on and in discovery mode.
• If you’ve previously paired your Plantronics Bluetooth with another device, it might connect to that device automatically. Be sure to disconnect from the other device if you want to pair with something new.

Frequently Asked Questions

How do i know if my plantronics bluetooth is in pairing mode.

Your Plantronics Bluetooth will have a light indicator that flashes blue and red when in pairing mode.

What do I do if my device doesn’t recognize my Plantronics Bluetooth?

Make sure your Bluetooth is in pairing mode and your other device’s Bluetooth is on and set to discoverable. Sometimes, turning off the Bluetooth on your device and then turning it back on can help.

Can I pair my Plantronics Bluetooth with multiple devices?

Yes, most Plantronics Bluetooth devices can remember multiple devices, but they can only be connected to one device at a time.

What should I do if my Plantronics Bluetooth won’t go into pairing mode?

Try resetting your Bluetooth device. The instruction manual that came with your device should have specific steps on how to do this.

How far away can my device be from my Plantronics Bluetooth and still maintain a connection?

Typically, Bluetooth devices work within a 10-meter (33-foot) range, but walls and other obstacles can affect this.

• Turn on your Plantronics Bluetooth
• Activate Pairing Mode
• Keep the Device in Pairing Mode

Pairing your Plantronics Bluetooth with your device shouldn’t be a headache. With these simple steps, you’ll have your Bluetooth device ready to go in no time. Whether you’re setting it up for the first time or reconnecting to a new device, the process is straightforward.

Remember to keep both devices close together for the best connection, make sure your Bluetooth is charged, and if you run into trouble, don’t hesitate to consult the user manual or get in touch with Plantronics support. Happy pairing, and enjoy the freedom of wireless connectivity with your Plantronics Bluetooth!

Matthew Burleigh has been writing tech tutorials since 2008. His writing has appeared on dozens of different websites and been read over 50 million times.

After receiving his Bachelor’s and Master’s degrees in Computer Science he spent several years working in IT management for small businesses. However, he now works full time writing content online and creating websites.

His main writing topics include iPhones, Microsoft Office, Google Apps, Android, and Photoshop, but he has also written about many other tech topics as well.

Read his full bio here.

Share this:

Join our free newsletter.

Featured guides and deals

You may opt out at any time. Read our Privacy Policy

Related posts:

• How to Connect Sony Headphones to iPhone
• How to Change Bluetooth Name on iPhone (2024 Guide)
• How to Pair a Jabra Bluetooth Headset with an iPhone 14: Step-by-Step Guide
• How to Forget a Bluetooth Device on the iPhone 5
• How to Pair an iPhone With Another Phone: A Step-by-Step Guide
• Can I Have Two Bluetooth Devices Connected to an iPhone at Once?
• How to Set up Bluetooth Headsets With IPhones: A Step-by-Step Guide
• Does the iPad Pair With Bluetooth Headphones? Find Out Here!
• Bluetooth Headset Won’t Connect to My iPad – Troubleshooting Tips
• How to Connect a Computer and an iPad With Bluetooth: A Step-by-Step Guide
• How to Turn off Bluetooth on iPhone 14: A Step-by-Step Guide
• How to Delete a Bluetooth Device on iPhone 15: A Step-by-Step Guide
• What Kind of Bluetooth Headsets Will Work with iPhone 14: A Guide
• How to Print Via Bluetooth From an IPhone to a Printer: A Step-by-Step Guide
• How to Connect Two iPhones to Bluetooth: A Step-by-Step Guide
• iOS 17: How to Change Bluetooth Name on iPhone Easily
• How to Delete a Bluetooth Device on an iPhone 13
• How to Connect a Bluetooth iPhone to a Mac: A Step-by-Step Guide
• How to Connect Airpods to Chromebook: A Step-by-Step Guide
• How to Disconnect Bluetooth Device – Windows 10

• Request Quote
• FREE Buyers Guide
• Headset Compatibility Guides
• Headsets 101 Guide
• Frequently Asked Questions

1-800-914-7996

$100 Minimum Order - No Returns

• Multi Connectivity
• Office Phones
• Computers & Phones w/ USB ports
• Microsoft Teams Certified
• Cell Phone Bluetooth Headsets
• Office Phones using QD
• Cables & Amplifiers
• Poly Headsets (Plantronics)
• Jabra Headsets
• Yealink Headsets
• Logitech Headsets
• EPOS Headsets
• Poly (Polycom) IP Phones
• Yealink IP Phones
• Teams Desk Phones
• Zoom Desk Phones
• Office & Contact Center
• 911 Center | Dispatch
• Conferencing
• Speakerphones for Conference Calls
• Cameras | Webcams
• EHS Cables/Lifters
• Wired Headset Cables & Amplifiers
• Wireless Headset Accessories
• Wired Headset Accessories
• Computer Headset Accessories
• Cell Phone Headset Accessories
• A/V Accessories

How to Pair Plantronics Voyager 5200 Bluetooth Headset

Pairing the voyager 5200 headset (also applies to voyager 5200 uc).

1) To pair your Voyager 5200, turn the headset on. Slide the power switch to the ‘on’ position showing green. You will hear “Power On” and the battery status.

2) Put your headset in pair mode. Press and hold the Call button until you hear “pairing”.

3) Indicator lights. The headset LEDs will flash red and blue.

4) Turn on your phone’s Bluetooth feature. While the Voyager 5200s LEDs are flashing red/blue, activate Bluetooth on your phone and set it to search for new devices.

• iPhone Settings > General > Bluetooth > On
• Android™ Smartphones Settings > Wireless & Networks > Bluetooth: On > Scan for devices

NOTE: Menus may vary by device

5) Select Voyager 5200. Select “PLT V5200 Series” on your phone as a found device.  If your phone asks, enter four zeros (0000) for the passcode or simply accept the connection.

6) Complete pairing process. Once your Plantronics Bluetooth pairing is complete, LEDs on the Voyager 5200 will stop flashing red/blue and you will hear “pairing successful.” from the headset.

NOTE: Your headset can pair with up to 8 devices but only maintain 2 connection simultaneously; this includes the Plantronics Bluetooth USB adapter as one of the 2 simultaneously connected devices.

Popular Audio/Video Solutions:

TECH TIPS to Pair Voyager 5200:

1) NFC pairing is also an option if you have no more than one other device already connected. NFC pairing will not work if there are two devices connected already.

• On your mobile phone ensure NFC is enabled and your phone’s display is unlocked. (Phones may vary and some phones may not have NFC support.)
• With the headset powered on, lay the headset on the back of phone near the NFC tag on your phone until NFC pairing completes. If necessary, accept the connection.

2) It’s always best to have the latest Voyager 5200 headset firmware which can be updated at Poly Hub

Pairing Your Voyager 5200 Headset Complete:

Your phone should now be connected with the Poly (formerly Plantronics) Voyager 5200 UC . Customers often ask us how to pair their Plantronics Voyager 5200 UC Bluetooth headset and with these instructions, you will be able to use your old headset with your new phone.

Loading manuals...

Plantronics Voyager 5200 Pairing: Wireless Bluetooth Headset Manual

The Plantronics Voyager 5200 Wireless Bluetooth Headset User Manual provides a comprehensive guide on how to use and operate the headset. It includes detailed instructions on how to charge the headset, check battery levels, and use the charging case. The manual also covers how to fit the headset properly and change the ear tips for a better fit. One of the main topics covered in the manual is pairing the headset with a mobile device. It provides step-by-step instructions on how to pair the headset via Bluetooth or NFC, as well as how to pair it with another device. Additionally, the manual explains how to make and receive calls, adjust the volume, mute the headset, and use voice assistants such as Siri or Google Assistant. The manual also covers advanced features such as enabling Tile and customizing voice alerts. Overall, the Plantronics Voyager 5200 Wireless Bluetooth Headset User Manual is a valuable resource for users looking to maximize their experience with the headset.

Plantronics Voyager 5200 Wireless Bluetooth Headset User Manual

Plantronics Voyager 5200 Wireless Bluetooth Headset

What’s in the box.

Accessories

Headset Overview

Charge Your Headset

Check Battery Level

There are multiple ways to check the battery level of the headset:

•  Listen to voice prompts on the headset by pressing the Call button.
•  Check the LED indicators on the headset or charging case.
•  Use the Plantronics Hub application for desktop or mobile. You can download the software by visiting plantronics.com/software.

Headset LED behavior

Use Charge Case

Battery status LEDs for charge case

• Slide headset over and behind your ear, then press gently toward your ear. NOTE : Remove your eyeglasses before donning the headset for best fit.
• Rotate microphone boom until it is pointed toward your mouth.
• Mic boom moves up and down for a better fit.

Pair your phone

Pair to mobile device.

• Activate Bluetooth on your phone and set it to search for new devices. • iPhone Settings > Bluetooth > On* • Android Settings > Bluetooth: On > Scan for devices* NOTE : *Menus may vary by device.
• Select “PLT V5200 Series.” If necessary, enter four zeros (0000) for the passcode or accept the connection. Once successfully paired, you hear “pairing successful” and the headset LEDs stop flashing. NOTE : Your headset can pair with up to 8 devices but only maintain 2 connections simultaneously; this includes the Bluetooth USB adapter.

NFC pairing

NFC pairing is an option to pair your phone if there are one or less devices already connected. NFC pairing will not work if there are two devices connected already.

• Ensure NFC is on and your phone’s display is unlocked. (Phones may vary.)
•  With the headset powered on, lay the headset on the back of phone near the NFC tag on phone as shown until NFC pairing completes. If necessary, accept the connection.

Pair another device

• With the headset powered on press and hold the Call button until you hear “Pairing.”
• While the headset LEDs are flashing blue and red, activate Bluetooth on your phone and set it to search for new devices.
• Select “PLT V5200 Series.” Once successfully paired, indicator lights stop flashing and you hear “pairing successful.”

Make/Take/End Calls

Answer a call

•  Put the headset on to answer a call, or
•  Say “answer” after call is announced, or
•  Tap the Call button.
•  Tap the .

Reject incoming call

•  Press the for 2 seconds.

Redial last outgoing call

•  Double-tap the .

Caller Announcement (mobile phone only) When wearing your headset, you will hear the name of a contact calling so you can decide whether to answer or ignore the call without having to check the phone screen. An incoming caller name is announced:

•  if your phone supports Phone Book Access Profile (PBAP)
•  if you granted access to your contacts during pairing process (for many mobile phones, this is preset out-of-the box and may not be necessary)
•  if the caller is stored in the phone’s contacts list

An incoming caller name is not announced: if the caller is unknown, unlisted, blocked, or the language is not supported.

Adjust the volume

Press the up (+) or down (–) during a call or while streaming audio. While not on a call or streaming audio you can press the Volume buttons to adjust the volume level for Caller Announce and other voice prompts.

Press the Mute button to mute or unmute your headset during an active call. Customize mute settings in Plantronics Hub app. Mute on reminder* * Plantronics Hub for Mac/Win or Plantronics Hub for iOS/Android required to enable. ( plantronics.com/software ) You can add a mute alert notification by managing your mute feature with Plantronics Hub. If this setting is enabled and you have muted an active call and you start to speak, an alert will remind you that you are still on mute.

Voice assistant

Siri, Google Assistant™, Cortana Press and hold the Call button for 2 seconds to activate your phone’s default voice assistant. Wait for the phone prompt to activate voice dialing, search, and other smartphone voice controls.

Enable and use Amazon Alexa

With Alexa enabled on your headset, you can ask for directions, call friends, access Alexa Skills and more. NOTE : Amazon Alexa isn’t available in all languages and countries.

•  Enable Alexa A. Connect the headset to your mobile device B. Update your Plantronics Hub mobile app (software) if necessary C. Launch Plantronics Hub app and ensure that your headset (firmware) is up-to-date D. From Plantronics Hub main menu, choose Apps > Amazon Alexa > Enable E. Launch the Amazon Alexa app and follow the instructions to set up your headset
•  Use Alexa A. To use Alexa, tap the Mute button and ask a question. You hear a tone when Alexa is activated.

Play or pause audio

Use sensors.

Smart sensors in this headset recognize if the headset is being worn and can automatically perform time-saving functions. Putting on your headset will:

•  Answer an incoming call
•  Transfer an active call from your phone
•  Resume streaming audio

Taking off your headset will:

•  Transfer an active call to your phone  Pause streaming audio

Reset Sensors You may need to reset the sensors if they are not working as expected.

•  Wearing the headset, tap the Call button to test sensors. A talk time voice alert means sensors are working. A tone means sensors need to be reset.
•  To reset the sensors, power on headset, connect the headset to a charger or directly to your computer’s USB port and place it on a flat, non-metallic surface for more than 10 seconds.

Disable sensors

You can disable your headset smart sensors through Plantronics Hub software under the Settings menu or in an idle state, simultaneously press and hold the call and mute buttons for 5 seconds and a voice prompt will inform you of smart sensors status.

Advanced features

Enable tile.

Use the Tile app to ring your lost headset or locate it on a map and ask the Tile community for help.

•  Connect the headset to your mobile device
•  Launch Plantronics Hub app and ensure that your firmware is up-to-date
•  From Plantronics Hub main menu, choose Apps > Tile > Enable
•  Launch the Tile app and follow the instructions to connect your headset

Voice alerts list

Following is a list of common voice alerts, you can use Plantronics Hub to customize the alerts. Download Plantronics Hub at plantronics.com/software

•  “Answering call”
•  “Battery low”
•  “Redialing last outgoing call”
•  “Incoming call”
•  “Mute on/off/muted”
•  “No phone is connected”
•  “Pairing”
•  “Pairing incomplete, restart headset”
•  “Pairing successful”
•  “Power on/off”
•  “Phone X connected/disconnected”
•  “Recharge headset”
•  “Smart sensors on/off”
•  “Talk time X hours”
•  “Volume maximum/minimum”

Adjust voice alert volume

Toggle the volume button when the headset is powered on and idle (not on a call or streaming music) to adjust the volume of the headset’s voice alerts.

Firmware Update

Firmware updates are designed to keep your headset current with the latest technology. Update your firmware to:

•  Change voice alert/command languages
•  Improve performance
•  Add new features to your device You can update your headset wirelessly using either your smartphone or your desktop PC with Plantronics Hub. Download at plantronics.com/software With Plantronics Hub for Android/iOS installed on your smartphone, check Settings to see if an update is available. With Plantronics Hub for Windows/Mac installed on your computer, check Updates to see if a new version of firmware is available for your device. Tips
•  If you are preforming an update using Plantronics Hub from your phone:
•  Remove your headset from your ear. Do not use your headset or smartphone until the update is complete.
•  Disconnect your headset from other devices such as phones, tablets and computers.
•  Do not start a second update from a second phone.
•  Do not play music on your phone during the update.
•  Do not answer or place a call during the update. NOTE :   If you receive a lot of calls, emails or texts that interrupt your update, try turning on the Do Not Disturb feature in your phone’s setting while you update.
•  If you are preforming an update using Plantronics Hub for [Windows] from your computer using your wireless Bluetooth adapter:
•  Remove your headset from your ear. Do not use your headset or computer until the update is complete.
•  Do not start a second update from another device such as a phone or another computer.
•  Disconnect other Bluetooth headsets from your computer.
•  Do not answer or place a call during the update.

Headset recovery

If you receive an over the air update failure message, or experience an update failure, take the following steps:

•  Connect your headset to your computer.
•  Download and install Plantronics Hub for Windows/Mac at https://www.plantronics.com/product/plantronics-hub-desktop
•  Open Plantronics Hub, go to Help > Support > Firmware Updates & Recovery and enter your Product ID (PID) to complete the recovery.

Troubleshooting

Q. Callers can’t hear me. Solutions:

•  Ensure headset is paired and connected to your phone.
•  Reposition headset on your ear as the sensors may not detecting it is on.
•  Reset your sensors (following above instructions) as they may need recalibrating.
•  Disable your sensors as they may be incompatible with your specific ear shape.
•  Disable HD Voice (Wideband Audio) via Plantronics Hub application as this setting may be incompatible with your phone.

Q. I can’t hear callers or music. Solutions:

• Ensure headset is paired and connected to your phone.

Q. My headset will not report 7 hours of talk time after it is fully charged Solutions:

•  Disable HD Voice (Wideband Audio) which uses more power.
•  Completely discharge your headset’s battery then give it a full charge.
•  Some phones have less efficient Bluetooth connections and thus will not allow for an optimal talk time of 7 hours. The talk time remaining estimate is partly calculated by your historical use so inconstancies in an estimate may occur based on your particular use patterns.

Specifications

NEED MORE HELP? plantronics.com/support Plantronics, Inc.  345 Encinal Street Santa Cruz, CA 95060 United States Plantronics B.V. Scorpius 171 2132 LR Hoofddorp Netherlands 2019 Plantronics, Inc. Plantronics and Voyager are trademarks of Plantronics, Inc. registered in the US and other countries, and OpenMic and PLT are trademarks of Plantronics, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under license. Google Play and the Google Play logo are trademarks of Google Inc. The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. All other trademarks are the property of their respective owners.

SPECIFICATION

Does it have a mute?

yes, it has a mute button.

is this the newest version of the Plantronics Voyager out there?

The Voyager 5200 and 5220 both say that they are Bluetooth 4.1 (see the Plantronics website for the official product specifications), but the Voyager 5200 UC says that it is “Blutooth 5.0 with BLE”

How does one switch between two paired devices (such as answer a call while using it on a screen share on a computer)?

In this scenario, receiving a phone call on the second device will send a notification on the headset, at this point you can press the call button once to answer the call and switch the audio over.

Can this model connect to laptop? does this package include usb to connect laptop to voyager?

Yes, Bluetooth headsets can be used by devices that support them and if your laptop has Bluetooth built-in and it’s adapter has the appropriate profiles (HSP for calls and A2DP for media streaming) it will be able to pair and use any of them (including our Voyager 5200). This specific item is the standard Voyager 5200 and does not include the BT600 adapter. Our Voyager 5200 UC variant does include the BT600 as well as the charging case in the box, you can find it with part number 206110-01. Please don’t hesitate to contact our customer care group at www.plantronics.com/support if you have other questions!

Does it let let you listen to music?

yes, Voyager 5200 has the audio profile that allows you to stream music from your device.

it is different versions/models of the “plantronics voyager 5200”, if that wich is the best one? I have the legend but noise cancellation it’s poor.

We have different versions of our Voyager 5200 series headset, the only differences between series are the included accessories: the headset is the same one. All of our Voyager 5200 series headsets include improved noise cancellation and wind reduction compared to our previous headsets, including our Voyager Legend.

Will it work with original voyager charging base?

Voyager 5200 has it own charging case. You can charge the headset inside the case, or on top as a charging stand. It will not charge in another Voyager case.

does this fit in the voyager legend charging case?

Voyager 5200 has it own charging case. You can charge the headset inside the case, or on top as a charging stand. It will not charge in the Voyager Legend case.

How does it turn on?

The Voyager 5200 has a small on/off switch on the back of the ear loop that will effortlessly allow you to power the headset on while you are wearing it. Please don’t hesitate to contact our Customer Care Group at 800-985-9815 if you require assistance!

Would you recommend for truckers?

Yes, the Voyager 5200 is a good option for truckers since it has a Four-mic noise cancelling and a proprietary DSP that cancels disruptive background noise like traffic or crowds. It also comes with six layers of our unique WindSmart technology that ensure your voice comes through clearly— especially outdoors. If you have any further questions, feel free to contact our Customer Care Team at: 800-985-9815!

Will this item work with a Mitel 6930?

No, this model is not recommended for a Mitel 6930, instead a compatible version would bee the Voyager 5200 Office or the Voyager 4220 Office. If you have any further questions, please don’t hesitate to contact our Customer Care Team at: 800-985-9815.

how to adjust the form fo the ear loop?

Really the only adjustment there is with this headset is the size of the ear bud used. Comes with 3 different ones. Small, Medium, and Large.

Does it come with a charger?

It comes with a wire to charge it with, that’s it

will this bluetooth connect to two phones at once?

Yes. But only one can rule. Meaning you can’t listen to both at the same time even though they are both connected.

Will this airphone operate with Bluetooth on a Harley Davidson motorcycle?

Most likely yes, while our devices are meant to be used with cellphones and computers, technically they should work with any device or vehicle that supports Bluetooth headsets.

How long does it take to fully charge the Plantronics Voyager 5200 Wireless Bluetooth Headset?

It takes approximately 90 minutes to fully charge the headset.

How can I check the battery level of the headset?

You can listen to voice prompts on the headset by pressing the Call button, check the LED indicators on the headset or charging case, or use the Plantronics Hub application for desktop or mobile.

How do I fit the headset properly?

Slide the headset over and behind your ear, then press gently toward your ear. Rotate the microphone boom until it is pointed toward your mouth. The mic boom moves up and down for a better fit. Change the eartip for a better fit by pushing in eartip and rotating to the left to unlock it. Align new eartip into slot; push, rotate to the right and lock into place.

How do I pair my mobile device with the headset?

The first time you power on the headset it begins the pairing process. Put on your headset and you will hear “pairing” and the headset LEDs flash red and blue. Activate Bluetooth on your phone and set it to search for new devices. Select “PLT V5200 Series.” If necessary, enter four zeros (0000) for the passcode or accept the connection.

How can I use voice assistants such as Siri or Google Assistant with the headset?

Press and hold the Call button for 2 seconds to activate your phone’s default voice assistant.

How can I enable and use Amazon Alexa with the headset?

Connect the headset to your mobile device, update your Plantronics Hub mobile app (software) if necessary, launch Plantronics Hub app and ensure that your headset (firmware) is up-to-date, from Plantronics Hub main menu, choose Apps > Amazon Alexa > Enable, launch the Amazon Alexa app and follow the instructions to set up your headset. To use Alexa, tap the Mute button and ask a question.

How can I reset the sensors on the headset?

Wearing the headset, tap the Call button to test sensors. A talk time voice alert means sensors are working. A tone means sensors need to be reset. To reset the sensors, power on headset, connect the headset to a charger or directly to your computer’s USB port and place it on a flat, non-metallic surface for more than 10 seconds.

How can I enable Tile on the headset?

Connect the headset to your mobile device, launch Plantronics Hub app and ensure that your firmware is up-to-date, from Plantronics Hub main menu, choose Apps > Tile > Enable, launch the Tile app and follow the instructions to connect your headset.

How can I customize voice alerts on the headset?

You can use Plantronics Hub to customize the alerts by downloading it at plantronics.com/software.

How can I update the firmware on the headset?

You can update the firmware through the Plantronics Hub application for desktop or mobile.

Read More About This Manual & Download PDF: Plantronics Voyager 5200 Wireless Bluetooth Headset User Manual – Optimized PDF Plantronics Voyager 5200 Wireless Bluetooth Headset User Manual – Original PDF

www.poly.com

More Manuals From Plantronics

Plantronics RIG 800 Series Wireless Gaming Headset Manual

plantronics BackBeat FIT 2100 Series manual

Plantronics BackBeat GO 3 manual

Plantronics Bluetooth Headset System manual

ItsManual.com

Here at ItsManual.com we collect as many owner’s manuals from around the web.

We then store these as both PDFs and as HTML that is easily viewed on pretty much every browser and device.

By doing this we can make sure that a copy of each manual we find stays online and is easily accessible for years to come.

Inside these owner’s manuals, you will typically find information on how to assemble, set up and even operate the product you have bought safely.

If you have a manual for a product that others may not have then please submit it to this site to help out.

• Submit Owner’s Manual
• Privacy Policy

• Wireless Headsets
• EARN COMMISSIONS
• (800)683-5715

Login to my account

Enter your e-mail and password:

New customer? Create your account

Lost password? Recover password

Recover password

Enter your email:

Remembered your password? Back to login

How To Pair Your Plantronics Voyager 4200 UC With The BT600 USB Adapter

If your Plantronics Voyager headset came unpaired from the BT600, this guide will show you how to fix that. 

With the BT600 USB Adapter plugged into your laptop or computer, press and hold the button on the side of the BT600  for 3-5 seconds. The BT600 will start flashing red and blue, indicating that it's in pairing mode.

Note*  The button is quite small, so we recommend using something like a paperclip or pen tip to hold down the button!

On your Voyager 4210 or Voyager 4220 headset, there's a Bluetooth pairing button.

Hold the pairing button in the upwards position, until you hear a voice within the headset say "Pairing", or until you see a red/blue LED light start to flash where you see the power/Bluetooth button show in the image below.

Note* You'll want to do this step while the BT600 is flashing red and blue

If the steps for pairing were successful, the Plantronics BT600 will turn blue, and the headset is now connected!

If you need further assistance, contact us today!

Sound like a pro on every call, even if your dog is barking in the background

Eliminate background noises for your microphone with Neep's AI-powered noise cancellation.

Try neep Free

Need help finding the best headset for your situation?

Contact us today and one of our friendly Advisors will match you with the right headsets.

CONTACT US TODAY

Should IT Teams Really Deal With Office Headset Support Tickets?

What Is the Best Plantronics Wireless Headset?

What Is a UC Headset?

Which is the Best Headset for Business Calls on a Busy Sales Team?

Yealink EHS36 Setup Guide For Discover D904 Wireless Office Headset

8 most frequently asked questions about office headsets.

5 Benefits Of Renting Your Office Headsets

The Complete Guide for Comfortable Office Headsets

What is the best wireless headset for office phones, shop our best selling headsets.

• Opens in a new window.

• Support Home
• Printer Support
• Computer Support
• Poly Collaboration Devices
• Ink & Toner Cartridges
• Software and Drivers
• Printer Diagonostic Tools
• Computer Diagnostic Tools
• Windows Support
• Print and Scan Doctor
• HP PC Hardware Diagnostics
• Create a new case
• Find an existing case
• Manage contracts and warranties
• Register an account
• MyHPSupport Help
• Security Bulletins
• Support Dashboard
• HP Account benefits

HOW TO PAIR VOYAGER 5200

First Time Pairing

The first time you turn on your headset, the pairing process begins.

Turn the headset on and then put it on. You'll hear "pairing" and the headset LEDs will flash red and blue.

Activate Bluetooth on your phone and set it to search for new devices.

iPhone Settings > Bluetooth > On*

Android Settings > Bluetooth: On > Scan for devices*

* Menus may vary by device.

Select "Poly V5200 Series.

If necessary, enter four zeros (0000) for the passcode or accept the connection.

Once successfully paired, you will hear "pairing successful" and the headset LEDs will stop flashing.

Your headset can pair up to 8 devices but only maintain 2 connections simultaneously; this includes the Bluetooth USB adapter.

PAIR TO ANOTHER DEVICE

Kindly follow the steps below

Turn the headset on and then put it on.

Press and hold the Call button until you hear "pairing."

While the headset LEDs are flashing blue and red, activate Bluetooth on your phone and set it to search for new devices.

Select "Poly V5200 Series." Once successfully paired, indicator lights will stop and you will hear "pairing successful."

Reference Video

Additional support options

Enter a topic to search our knowledge library

• Sign up / Sign in
• × Information Need Windows 11 help? --> Windows update impacting certain printer icons and names. Microsoft is working on a solution. Click here to learn more Information Need Windows 11 help? Check documents on compatibility, FAQs, upgrade information and available fixes. Windows 11 Support Center.

• HP Community
• Poly Headsets
• Bluetooth Headsets & Earbuds
• Plantronics Voyager 5200 Bluetooth Headset not chargeing fro...

Plantronics Voyager 5200 Bluetooth Headset not chargeing from base set

• Mark Topic as New
• Mark Topic as Read
• Float this Topic for Current User
• Printer Friendly Page

Create an account on the HP Community to personalize your profile and ask a question

‎06-22-2024 08:31 AM

• Mark as New

Didn't find what you were looking for? Ask the community

Expedia Rewards is now One Key™

Elektrostal, visit elektrostal, check elektrostal hotel availability, popular places to visit.

• Electrostal History and Art Museum

You can spend time exploring the galleries in Electrostal History and Art Museum in Elektrostal. Take in the museums while you're in the area.

• Cities near Elektrostal

• Places of interest
• Yuri Gagarin Cosmonaut Training Center
• Central Museum of the Air Forces at Monino
• Peter the Great Military Academy
• Ramenskii History and Art Museum
• Bykovo Manor
• Balashikha Arena
• Malenky Puppet Theater
• Balashikha Museum of History and Local Lore
• Pekhorka Park
• Saturn Stadium
• Orekhovo Zuevsky City Exhibition Hall
• Noginsk Museum and Exhibition Center

• Bahasa Indonesia
• Eastern Europe
• Moscow Oblast

Elektrostal

Elektrostal Localisation : Country Russia , Oblast Moscow Oblast . Available Information : Geographical coordinates , Population, Area, Altitude, Weather and Hotel . Nearby cities and villages : Noginsk , Pavlovsky Posad and Staraya Kupavna .

Information

Find all the information of Elektrostal or click on the section of your choice in the left menu.

• Update data

Elektrostal Demography

Information on the people and the population of Elektrostal.

Elektrostal Geography

Geographic Information regarding City of Elektrostal .

Elektrostal Distance

Distance (in kilometers) between Elektrostal and the biggest cities of Russia.

Elektrostal Map

Locate simply the city of Elektrostal through the card, map and satellite image of the city.

Elektrostal Nearby cities and villages

Elektrostal weather.

Weather forecast for the next coming days and current time of Elektrostal.

Elektrostal Sunrise and sunset

Find below the times of sunrise and sunset calculated 7 days to Elektrostal.

Elektrostal Hotel

Our team has selected for you a list of hotel in Elektrostal classified by value for money. Book your hotel room at the best price.

Elektrostal Nearby

Below is a list of activities and point of interest in Elektrostal and its surroundings.

Elektrostal Page

• Information /Russian-Federation--Moscow-Oblast--Elektrostal#info
• Demography /Russian-Federation--Moscow-Oblast--Elektrostal#demo
• Geography /Russian-Federation--Moscow-Oblast--Elektrostal#geo
• Distance /Russian-Federation--Moscow-Oblast--Elektrostal#dist1
• Map /Russian-Federation--Moscow-Oblast--Elektrostal#map
• Nearby cities and villages /Russian-Federation--Moscow-Oblast--Elektrostal#dist2
• Weather /Russian-Federation--Moscow-Oblast--Elektrostal#weather
• Sunrise and sunset /Russian-Federation--Moscow-Oblast--Elektrostal#sun
• Hotel /Russian-Federation--Moscow-Oblast--Elektrostal#hotel
• Nearby /Russian-Federation--Moscow-Oblast--Elektrostal#around
• Page /Russian-Federation--Moscow-Oblast--Elektrostal#page
• Terms of Use
• Copyright © 2024 DB-City - All rights reserved
• Change Ad Consent Do not sell my data

• Yekaterinburg
• Novosibirsk
• Vladivostok

• Tours to Russia
• Practicalities
• Russia in Lists

Rusmania • Deep into Russia

Out of the Centre

Savvino-storozhevsky monastery and museum.

Zvenigorod's most famous sight is the Savvino-Storozhevsky Monastery, which was founded in 1398 by the monk Savva from the Troitse-Sergieva Lavra, at the invitation and with the support of Prince Yury Dmitrievich of Zvenigorod. Savva was later canonised as St Sabbas (Savva) of Storozhev. The monastery late flourished under the reign of Tsar Alexis, who chose the monastery as his family church and often went on pilgrimage there and made lots of donations to it. Most of the monastery’s buildings date from this time. The monastery is heavily fortified with thick walls and six towers, the most impressive of which is the Krasny Tower which also serves as the eastern entrance. The monastery was closed in 1918 and only reopened in 1995. In 1998 Patriarch Alexius II took part in a service to return the relics of St Sabbas to the monastery. Today the monastery has the status of a stauropegic monastery, which is second in status to a lavra. In addition to being a working monastery, it also holds the Zvenigorod Historical, Architectural and Art Museum.

Belfry and Neighbouring Churches

Located near the main entrance is the monastery's belfry which is perhaps the calling card of the monastery due to its uniqueness. It was built in the 1650s and the St Sergius of Radonezh’s Church was opened on the middle tier in the mid-17th century, although it was originally dedicated to the Trinity. The belfry's 35-tonne Great Bladgovestny Bell fell in 1941 and was only restored and returned in 2003. Attached to the belfry is a large refectory and the Transfiguration Church, both of which were built on the orders of Tsar Alexis in the 1650s.  

To the left of the belfry is another, smaller, refectory which is attached to the Trinity Gate-Church, which was also constructed in the 1650s on the orders of Tsar Alexis who made it his own family church. The church is elaborately decorated with colourful trims and underneath the archway is a beautiful 19th century fresco.

Nativity of Virgin Mary Cathedral

The Nativity of Virgin Mary Cathedral is the oldest building in the monastery and among the oldest buildings in the Moscow Region. It was built between 1404 and 1405 during the lifetime of St Sabbas and using the funds of Prince Yury of Zvenigorod. The white-stone cathedral is a standard four-pillar design with a single golden dome. After the death of St Sabbas he was interred in the cathedral and a new altar dedicated to him was added.

Under the reign of Tsar Alexis the cathedral was decorated with frescoes by Stepan Ryazanets, some of which remain today. Tsar Alexis also presented the cathedral with a five-tier iconostasis, the top row of icons have been preserved.

Tsaritsa's Chambers

The Nativity of Virgin Mary Cathedral is located between the Tsaritsa's Chambers of the left and the Palace of Tsar Alexis on the right. The Tsaritsa's Chambers were built in the mid-17th century for the wife of Tsar Alexey - Tsaritsa Maria Ilinichna Miloskavskaya. The design of the building is influenced by the ancient Russian architectural style. Is prettier than the Tsar's chambers opposite, being red in colour with elaborately decorated window frames and entrance.

At present the Tsaritsa's Chambers houses the Zvenigorod Historical, Architectural and Art Museum. Among its displays is an accurate recreation of the interior of a noble lady's chambers including furniture, decorations and a decorated tiled oven, and an exhibition on the history of Zvenigorod and the monastery.

Palace of Tsar Alexis

The Palace of Tsar Alexis was built in the 1650s and is now one of the best surviving examples of non-religious architecture of that era. It was built especially for Tsar Alexis who often visited the monastery on religious pilgrimages. Its most striking feature is its pretty row of nine chimney spouts which resemble towers.

Plan your next trip to Russia

Ready-to-book tours.

Your holiday in Russia starts here. Choose and book your tour to Russia.

REQUEST A CUSTOMISED TRIP

Looking for something unique? Create the trip of your dreams with the help of our experts.

• Plantronics Manuals
• Voyager 6200 UC
• User manual

Plantronics Poly Voyager 6200 UC - Bluetooth Headset Manual

• User manual (15 pages)

Advertisement

Device overview

Usb bluetooth adapter, connect to pc, configure usb adapter, pair to mobile device, pair usb adapter again, update your poly device, check headset battery status, replace eartips, power on/off, adjust the volume, play or pause audio, track selection, fast forward/rewind, voice assistant, make/take/end calls, interact with microsoftsoft phone, online indicator, recalibrate headset sound, troubleshooting.

• Download manual
• 1 Device overview
• 2 USB Bluetooth adapter
• 3.1 Connect to PC
• 3.2 Configure USB adapter
• 3.3 Pair to mobile device
• 3.4 Pair USB adapter again
• 4.1 Update your Poly device
• 5.1 Check headset battery status
• 6.1 Replace eartips
• 7.1 Power on/off
• 7.2 Adjust the volume
• 7.3 Play or pause audio
• 7.4 Track selection
• 7.5 Fast forward/rewind
• 7.7 Voice assistant
• 7.8 Make/Take/End Calls
• 8.1 Interact with Microsoftsoft phone
• 8.2 Online indicator
• 8.3 Recalibrate headset sound
• 9 Troubleshooting
• 10.1 Download manual

NOTE *Functionality varies by application. May not function with web-based apps.

Be safe Please read the safety guide for important safety, charging, battery and regulatory information before using your new headset.

Connect and pair

Your Bluetooth USB adapter comes pre-paired to your headset.

• The USB adapter LED flashes and then turns solid to indicate the headset is connected to the USB adapter. If you are wearing your headset you hear "PC connected" to indicate the connection has been established. When on a call, the LED on the USB adapter flashes blue. When not on a call the LED is solid.
• Load Poly Lens Desktop App by visiting poly.com/lens. This allows you to customize your headset behavior through advanced settings and options.

Your high-fidelity Bluetooth USB adapter comes ready to take calls. If you want to listen to music, you will need to configure your Bluetooth USB adapter.

• To configure your Bluetooth USB adapter to play music, go to Start menu > Control Panel > Sound > Playback tab. Select Poly BT700 or Plantronics BT600, set it as the Default Device and click OK.
• To pause music when you place or receive calls, go to Start menu > Control Panel > Sound > Communications tab and select the desired parameter.
• To configure the Bluetooth USB adapter, go to Apple menu > System Preferences > Sound. On both the Input and Output tabs, select Poly BT700 or Plantronics BT600 .

• Activate Bluetooth on your phone and set it to search for new devices.
• iPhone Settings > Bluetooth > On*
• Android Settings > Bluetooth: On > Scan for devices* NOTE *Menus may vary by device.
• Select "Poly V6200 Series." If necessary, enter four zeros (0000) for the passcode or accept the connection. Once successfully paired, you hear "pairing successful" and the headset LEDs stop flashing. NOTE To enable caller name announcement, allow access to your contacts if your phone prompts you. NOTE Your headset can pair with up to 8 devices but only maintain 2 connections simultaneously; this includes the Bluetooth USB adapter.

Typically, your USB adapter is pre-paired to your Poly audio device. In the event that your again adapter is disconnected or bought separately, you will need to pair the adapter to your Poly device. The adapter pairing method depends on which USB adapter you use.

• Insert the high-fidelity Bluetooth USB adapter into your laptop or computer and wait for your computer to recognize it.
• Put your Poly audio device in pair mode.
• Launch Poly Lens Desktop App and navigate to Poly BT700.
• Put your Bluetooth USB adapter into pair mode by selecting "Pair new device" on the adapter's main page or overflow menu. Your adapter flashes red and blue. Pairing is successful when you hear "pairing successful" and "PC connected" and the Bluetooth USB adapter LED is solid. NOTE To pair again using Plantronics Hub Desktop App, navigate to the app's Poly BT700 general settings and select "Pair."

NOTE Adapter design varies by USB connection.

Pairing is successful when you hear "pairing successful" and "PC connected" and the Bluetooth USB adapter LED is solid.

Load software

Customize your device behavior through advanced settings and options with Poly Lens App. Some softphones require the installation of Poly software to enable device call control (answer/end and mute) functionality. Download: poly.com/lens.

NOTE Device settings and updates are also available in Plantronics Hub App.

Keep your firmware and software up-to-date to improve performance and add new features to your Poly device. Update your device using your computer with Poly Lens Desktop App. Download at poly.com/lens.

While updating:

• Do not use your Poly device until the update is complete.
• Disconnect your Poly device from paired devices such as phones, tablets and computers.
• Do not start a second update from a second device.
• Do not stream media.
• Do not answer or place a call.

NOTE Your headset will vibrate once to confirm that charging is in progress.

Check your headset battery status:

• View status in Poly Lens Desktop App
• With headset inactive, slide and release the Power switch away from the off position. Listen to the voice alert or observe the headset LEDs.

TIP To reset the accuracy of the talk time alert, deplete the headset battery then charge fully.

• Try the 3 eartips to find which size fits you comfortably while blocking external noise.
• Listen to music and select the eartip that gives you the most bass response.

Changing the eartips and locking them in place is easy. Left and right are indicated on the earbud and on the eartip.

Slide the switch to power on or off.

Tap the Volume up or Volume down button.

Adjust headset microphone volume (softphone) Place a test softphone call and adjust softphone volume and PC sound volume accordingly.

Tap the Call button.

Double-tap the Call button to skip to the next track or triple-tap the Call button to play the previous track. NOTE Functionality varies by application. May not function with web-based apps.

Double-tap and hold the Call button to fast-forward. Triple-tap and hold the Call button to rewind. NOTE Functionality varies by application. May not function with web-based apps.

Active Noise Canceling (ANC) reduces external noise and enhances your music and sound quality. Slide the switch to activate ANC.

Siri, Google Assistant™, Cortan a Press and hold the Call button for 2 seconds to activate your phone's default voice assistant. Wait for the phone prompt to activate voice dialing, search, and other smartphone voice controls.

Answer or end a call Tap the Call button.

Answer a second call First, tap the Call button to end current call, then tap the Call button again to answer new call.

Mute While on an active call, tap the red Mute button.

Hold a call Double-tap the Call button to put a call on hold. Tap the Call button again to answer an incoming call. NOTE Up to 2 calls can be put on hold.

Switch between calls (flash) Double-tap the Call button to switch between calls. NOTE Flash functionality works only between calls of the same type. Flash does not work between mobile and softphone calls.

Call back last call Double-tap the Call button.

Answer calls from a second device It's easy to answer calls from two devices (including softphone). When on a call, you hear a ringtone notification of the incoming call from the second paired device. To answer a second call from the other device, first tap the Call button to end the current call and tap the Call button again to answer the new call. If you choose to not answer the second call, it will go to voicemail.

More Features

• For Microsoft Teams, tap the headset's Call button to interact (Teams desktop application required).
• For Skype for Business, press and hold the headset's Call button for 2 seconds to interact (Skype for Business desktop application required).

Your headset LED illuminates red to inform others that you are on a call. Manage settings in Poly Lens App.

Recalibrate your headset sound if your voice sounds muffled on a call or if callers hear your background noise.

• Power off your headset for 10 seconds
• Power on headset in a quiet environment

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Plantronics Poly Voyager 6200 UC - Bluetooth Headset Manual

Need Assistance?

Do you have a question about the Poly Voyager 6200 UC that isn't answered in the manual? Leave your question here.

Thank you! Your question has been received!

Related Manuals for Plantronics Poly Voyager 6200 UC

Table of Contents

Delete from my manuals.

Click the green button to print the entire article. To print the original version of the document - click the blue one.

Upload manual