kbs tour c taper 105 s

Which KBS iron shaft is best for you?

Published: 22 September 2022 Last updated: 17 January 2024

KBS iron shafts are for everyone from the world’s best golfers to slow-swinging amateurs, but which of their 14 models best suits you? Let us explain…

Golfers rarely give a second thought to which shafts are in a new set of irons . Yet, KBS believe 14 different models (all of which come in numerous weights and flexes) are needed to cover all types of players.

Technology has taught the brains behind KBS – Kim Braly, if he’s to fit hard-hitting tour pros alongside moderate speed, high handicap amateurs the brand needs a vast array of options. The thinking has led to the creation of 14 different steel and graphite KBS iron models.

EXPLAINED: How we test golf equipment

We don’t want to fit you for your perfect iron shaft. That should only ever be done with the help of a decent club fitter in the real world. But, to highlight how shaft technology helps you hit better iron shots more often we’ve taken a look at the full KBS line-up.

When buying your next set remember KBS shafts can change how a shaft feels, launches and spins, so you have the opportunity to choose your perfect ball flight and set-up. Here’s what you need to know about KBS iron shafts.

Players’ models  

Kbs c-taper iron shaft.

There are three-pillar players’ shafts within the KBS line-up and each differs by balance point. The Tour is stiffest in the grip section (for good feel) and it gives mid-launch and mid-spin. The C-Taper is stiffest in the tip section (close to the head) to give a stout and strong feel and deliver low launch with low spin. The S-Taper fits neatly between the pair.

C stands for Constant Taper, so the shaft has no steps, which allows the C-Taper to have a strong and stout feel. Typically the model suits stronger golfers, and players can expect a 5% lower ball flight than True Temper’s Dynamic Gold . Major winners Gary Woodland and Justin Rose have played the C-Taper as has Rickie Fowler .

KBS $-Taper iron shaft

All three KBS pillar players’ iron shafts come in the same five weights, so golfers get to choose based on the launch, spin, and ball flight desired for their own game.

Half flexes (R+ and S+) are brilliant for golfers that sit on the fence between two flexes. They alleviate decisions around whether to go regular flex for more distance or stiff for increased accuracy. The S-Taper (Subtle Taper) is midway between the C-Taper (lowest spin and launch) and Tour shaft (mid-spin and launch).

KBS Tour iron shaft

The Tour is Kim Braly’s signature shaft, it was the first KBS model and it’s the mothership of KBS. Thanks to not being overly strong the Tour can suit a wide audience of golfers. Its consistent step pattern is a good fit for smoother, less aggressive transition players.

Thanks to being a high balance point model (so weight is positioned closer to the grip), golfers get a slightly softer feel and good feedback at the top of the swing. A further Tour FLT (Flighted) shaft model launches long irons higher and short irons lower for a more optimised set.

RELATED: Which Taylo rMade iron suits me ?

How KBS players’ steel shafts differ in launch and spin

KBS Tour V iron shaft

KBS see the Tour V as an outlier shaft because the model is 10g lighter than the C-Taper, $-Taper, and Tour.

KBS Tour Rep Paul Steels says “the Tour V shaft is often a good fit for players who like the shot shape and flight of the C-Taper but want extra feel, as the C-Taper is just so boardy”.

KBS C-Taper Lite, $-Taper Lite, and Tour Lite iron shafts

There’s lots of misunderstanding around lighter iron shafts. But KBS say golfers should see their Lite models (which are 15g lighter than the standard models) as giving a little more launch and being easier to get airborne (than the 3 pillar models).

For players who don’t go at iron shots full tilt Lite models can be a really good option as club speeds increase and shots launch higher. Lite models and aging typically go hand-in-hand. If you happen to overload the shaft you’ll know because shots will start turning over left of the target (for a right-handed golfer).

Also, think about launch windows. A strong but very low launch player could see benefits by going Lite but in a strong flex to up launch and ball flight.  

RELATED: Should you play the KBS TD driver shaft?

KBS iron shaft swing speed recommendations

Average speed KBS iron shaft models

Kbs max and max ct80 iron shafts.

To ensure KBS have shafts to suit every golfer’s speed they produce ultralight Max and Max CT80 shafts as well. Both Max shafts are high-launch, high-spin models which help optimise ball flight for maximum carry distance at moderate speeds.

Remember it’s possible to be a fast but inconsistent high handicapper (in which case you’d be better suited to one of the KBS players’ shaft models), so think about shafts suiting speeds rather than ability. Thanks to their low kick point and high launch properties the Max shafts regularly make an appearance in stronger lofted irons (think TaylorMade Stealth and Callaway Big Bertha B21 ).

Typically high-speed players, irrespective of ability will not touch this product.

RELATED: Which Lamkin grip best suits your game?

There are junior options too   

To ensure golfers can go through their whole golfing career with a familiar KBS feel, the brand also produce two junior steel shafts (the 560 and 580). Both are designed to suit the speed of 8 – 11-year-old players.

Both shafts are lightened steel, so the weights are similar to lightweight graphite iron ranges. But, crucially golfers don’t get a heavy head feel which can cause issues when switching from graphite to steel once a child is a stronger teenager.   

When should you go graphite?

Graphite irons shafts are massively misunderstood in the modern game. Many people think they’re for older golfers and slower speed players, which just isn’t the case. Graphite irons shafts are easier on the body. They remove vibration, and can suit everyone from tour players to very moderate speed club golfers.

In typical KBS fashion, the brand make three graphite models (all are available in numerous weights and flexes), here’s what you need to know about them.

How KBS graphite iron shafts differ in launch and spin

KBS TGI – Tour Graphite Iron shaft

KBS specifically target a steel-like feel from their graphite shafts. They’ve done such a good job fulfilling their brief several tour players swear it’s not actually graphite. Thinking instead it’s a steel shaft painted black.

The TGI can be matched to golfers’ speeds (there are eight weights, so the model can suit from 57mph to 100mph speed players) in exactly the same way as the brand’s steel shafts. The TGI is the company’s lowest launching and spinning graphite iron shaft, it’s pretty strong and stout, so decent players often like it.

KBS PGI – Players Graphite Iron shaft

In developing their shafts KBS have undertaken masses of research, and they say when the flex isn’t disclosed golfers often prefer the feel of graphite over steel. Their advice is to play the flex you need. Don’t be tempted to go stiffer than necessary. And if you swing a 6-iron at 70mph play a shaft that performs at that speed.

The PGI was developed to bring a steel-like feel to graphite and it’s a step up from the lower launching and spinning TGI. The PGI is widely played on the LPGA Tour, it’s the brand’s mid-launch/mid-spin graphite iron shaft. Six weights mean the model can suit from 57mph to 94mph players.

KBS Max graphite iron shaft   

The Max graphite is the highest launching and spinning graphite iron shaft in the KBS line-up. It’s a model for golfers who really need help launching shots high into the air to maximise carry distance. Five weights mean the model can suit swing speeds from 51 to 82mph.

KBS graphite iron shaft swing speed recommendations

Get it right the first time

KBS reckon so long as golfers get fitted correctly the first time they can progress through KBS models throughout their playing career. It means, if like Gary Woodland you’re a C-Taper player or Cameron Smith a Tour shaft player you stay within that family but progress to lighter models as you age.

And to demonstrate how important finding the right family is KBS say to look at Adam Scott and Gary Woodland . Scott has been a Tour shaft player for years (think of his smooth, under-control swing) whereas Woodland is a big strong hitter of the ball, so he’s a C-Taper guy all day long. But, switch their clubs over and both would struggle to play, as they wouldn’t get the ball flight or shot window they’d be expecting.    

Don’t forget your wedges

Today KBS are a through-the-bag shaft company. They make shafts for drivers, fairways, hybrids, irons, wedges, and putters, so if you’re taking the time to get fitted don’t neglect how the company produce five different wedges shafts too.

KBS say the Hi-Rev wedge shaft has been designed from the Tour shaft profile. There’s a lengthened tip section to give a softer feel and generate extra spin. If you play the Tour shaft you’ll likely enjoy this wedge model too. The brand’s 610 wedge shaft was designed to complement the Tour V shaft.

Where C-Taper and S-Taper fans often run shafts from their irons through into the wedges, albeit at a slightly lighter weight as wedge shots are rarely hit full out.

Want more information about KBS iron shafts? Visit their website here   

How do KBS iron shafts compare in data?

Verdict: KBS iron shafts

Lots of people will look at our test pro’s data and think the shafts are performing very much alike. But the data says nothing about how different the shafts felt.

Comparing the C-Taper and S-Taper the data shows the pair as being pretty evenly matched but the difference in feel was phenomenal. So different in fact our test pro felt he just wouldn’t be able to use the C-Taper effectively on the golf course (as it’s so strong). Where the $-Taper felt brilliant and could well be his perfect match within the KBS family.

The Lite shafts produced a faster ball speed, just as KBS promised and the C-Taper Lite in particular launched and flighted shots higher with a steeper descent angle, so there’s a huge amount of tuning in ball flight and feel available from shafts.

Just as KBS promised the TGI graphite shaft produced some very good optimal numbers too, they’d be a very sensible choice for golfers looking to avoid the shock and vibration of using steel shafts. Equally the Max graphite climbed to its peak height very early in its flight, which at lower speeds will be a real benefit in maximising carry distance.   

At the end of the day, KBS are all about the consumer. You get what you want, whether that be higher or lower launching, more or less spin, or a different feel, everything is on offer within the KBS iron family. Our test pro liked the $-Taper for his own game as it didn’t feel too strong, yet it felt stable and produced a good feel through the hands, and he had control over his ball flight.

KBS Founder Kim Braly on a life spend designing golf shafts

Many golfers won’t know the name Kim Braly, but the guy is a shaft legend. He has dedicated his life to creating the highest performance shafts you can buy, and we sat down with him. 

How have shafts evolved over the last 150 years?

A hundred of those years were dominated by hickory shafts. Steel shafts didn’t come about until the 1930s. My father patented “Frequency Matching” (in the 1980s) which has been the biggest breakthrough during my lifetime. Until then there were no standards; the method gave a baseline to compare and match shafts. Everything I’ve achieved since is down to the Frequency Matching method he invented.

How did the Frequency Matching idea come about?

We made titanium irons with tungsten weights and wanted to see how different set-ups affected performance. We organised a golf robot, and tried two identical set ups, yet the results were entirely different. We started questioning if shafts might not be matched. My dad developed Frequency Matching as a way to compare and match (for flex, weight, profile through CPM, cycles per minute) shafts to one another. The process hasn’t changed for 30 years.

You developed the Rifle and Project X shafts which are still popular; what was different about them?

No set of shafts had been designed individually for each club until then. They were a breakthrough. We’d follow the PGA Tour (at a time when there were no tour vans) and explain to players about matching their irons. We could match a whole set to the club they felt most comfortable and confident with. We were custom fitting without really knowing it.

I’m also proud of what we’ve achieved at KBS over the last 10-12 years. If we aren’t the leaders in shaft technology I really don’t know who is.

What was the players’ reaction?

They were super interested. We had lines of people wanting to understand how shafts affected performance. We learned all sorts. In relation to frequency the lightest shaft in the bag (the driver) will be the stiffest. The weakest shaft should be in the lob wedge, as there’s lots of shots hit less than full out, and a fraction weaker shaft allows you to know where the head is.

Today, the correct fit for players is often a flex and a half stiffer than we recommended 15 years ago. At the start we were a couple of guys just trying to understand. It wasn’t about marketing; we had our mathematical theory and we wanted to understand if it worked in practice.

How have launch monitors affected modern shaft fittings?

They’re one of the best things to have happened to golf. Launch monitors have helped people understand ball flight, spin, height and launch. Every shaft I’ve ever designed has been designed with a type of player in mind.

Each KBS shaft fits into a matrix, we’ve worked on them one at a time, and the line-up is nearly 100% complete.

Where do you start designing new shafts? Is it an idea from you, or a request from a player?

We have ideas, but they have to work in practice. In golf “feel” is a huge thing. If the feel is wrong products go nowhere. I’ve enjoyed dialling in the KBS Tour Lite (steel) and KBS PGI (Players’ Graphite Iron shaft) to be “everyman” golf shafts over the last two years.

They work at specific swing speed ranges, and thanks to our options we can optimise launch and spin for golfers swinging 6-iron in the region of 80mph.

You’ve worked on a bunch of top performing shafts, but which are you most proud of?

The Precision Rifle put me on the map, set up my career and I learned loads from it. The first KBS Tour shaft was a really big deal, too. It’s the foundation stone of every other KBS shaft, where all our other current shafts start. I’m awfully proud of it. 

Have you hit hickory shafts? How different are they to today’s models?

The last two tournaments I’ve played have been hickory challenges. Hickory weighs a ton (they’re 180g in a 6-iron), they’re really stiff but the torque is unreal. You can literally twist the head in your hand. Wood is strong in one direction – the one it’s grown in – which is up and down the shaft.

Will graphite shafts ever be the norm through the bag?

I’ve heard so many times how graphite represents the future. In terms of iron shafts steel is still a great material. The reason graphite became popular is its strength to weight ratio. It’s possible to make a 45in driver shaft at a “normal” swingweight.

You just can’t do that with steel, but you don’t need that as much in irons. Steel isn’t going away.    

KBS make 16 different iron shafts; why so many?   

Each of our profiles do different things. You may have the tendency to hit the ball low, so we have shafts designed to spin more and have a higher trajectory, and vice-versa.

For every 2.5mph of club speed change golfers need a different shaft flex, and that’s why we make half flexes. There’s also feel to consider. In our KBS Tour franchise we go from 130g to 90g in 5g increments (nine different weights), so golfers get what they need.

Whereas in a traditional three flex line-up (R, S, X) golfers get pushed into the best option available. KBS have a reputation for making good feeling shafts because golfers get shafts with the correct load at impact, which naturally feels good. Everything really does come back to fitting.

READ NEXT: Best 2022 Iron Test

BECOME A TODAY’S GOLFER MEMBER:  Unlimited access to premium content and exclusive rewards!

Anglo Carson, a Certified Golf Instructor, embarked on a remarkable journey, driven by his unwavering love for golf. He founded The Golf Mine with a singular mission - to create a golfing haven where passion knows no boundaries. His lifelong love affair with golf, combined with his expertise as a Certified Golf Instructor, turned into a vision to share his extensive knowledge, inspire, and promote the game he holds dear.

View all posts

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

Get plugged in…

KBS C-Taper Lite Shaft Review

More in reviews:.

50 Words or Less

The KBS C-Taper Lite is very different than the standard C-Taper.  High launching with mid spin but feel similar to the original C-Taper.

Introduction

Every golf equipment nerd has unrequited love for some piece of gear.  Whether it’s a blade iron that your handicap just won’t let you play or a driver that looks great but goes nowhere, we battle to reconcile our wants with our needs.  For me, one of those pieces of gear is the KBS C-Taper shaft.  I love the feel, and I love the accuracy, but the launch conditions just aren’t meant for me.  Thankfully I’ve found a better match in the C-Taper Lite.

The C-Taper Lite has the same stepless, brushed steel appearance as the C-Taper.  To the extent that any steel shaft looks cooler than another, I like this look.  There’s no glare, and the stepless look has always appealed to me.  Beyond that, the C-Taper Lite can be identified by KBS’s trademark red label.

The feel of the original C-Taper kept it foremost in my thoughts despite the fact that it’s not a great fit for my swing.  Some people found it to be rigid, but it made me feel like I could hit the ball down a hallway.

The C-Taper Lite keeps most of that feel while adding a little more kick.  This shaft still gives me the sense of being very accurate and stable because of the stiff tip section, but there’s a little more action in the butt section .  Whether you liked the feel of the original C-Taper or not, I think the C-Taper Lite could suit your tastes.

Performance

I was fit for the C-Taper Lite during my recent iron fitting with Club Champion .  As I mentioned earlier, the C-Taper – a low launch, low spin shaft – is not a good fit for me, so I was surprised when I was handed the C-Taper Lite.  Though the two shafts share a name, they are on nearly opposite ends of the fitting spectrum.  The C-Taper Lite produces high launch and mid-spin , which is exactly what I needed to gain distance.

My favorite characteristic of the original C-Taper – the accuracy – is still present in the C-Taper Lite.  No matter how hard I swing, this shaft holds up and produces accurate shots.  I feel like the C-Taper Lite gives me the exact results that my swing deserves, which is everything I want in a shaft.

There are significant weight changes in the C-Taper Lite depending on flex and whether you use parallel or taper tip shafts.  In taper tip, the X-flex is 115 grams with the stiff and regular at 110 and 105, respectively.  The raw weights of the parallel tip shafts are significantly heavier at 125, 118.5, and 108.5 in X, stiff, and regular.  Make sure that you work with your fitter to find the right weight and flex for your swing.

If, like me, you love the feel and accuracy of the original C-Taper but need less weight or more air under the ball, try the KBS C-Taper Lite .  While the feel is similar to the C-Taper, the performance is entirely different, launching the ball high with moderate spin.  Best of all, it maintains the C-Taper’s trademark accuracy.

Recent Posts

• Shot Scope V5 GPS & Shot Tracking Watch Review - April 25, 2024
• Ocean Point Golf Course Review - April 24, 2024
• Fripp Island Resort – Your Next Golf Destination - April 24, 2024

59 Comments

I made the switch a couple weeks ago from graphite and love the C-taper 105. At almost 60 years old, I was concerned about the feel on my elbows which had taken a real beating fromother steel shafts. So great to see an article on these. More senior players may want to look at this option. I feel like I have more consistency with this shaft. Thanks as always for the great articles.

Matt, how would you say this shaft compares to the Modus 105 in stiff

Outside of being in a similar weight class, the two don’t have much in common.

Can you expound on the difference? Thx

I have a full review of the Modus 105 here: https://pluggedingolf.com/nippon-modus-3-tour-105-shaft-review/

I find this interesting. The Mizuno Swing optimizer put me into the C-Taper Lite Stiff followed by the Modus3 105 X Stiff (ended up gaming the Stiff flex Modus3).

I found both shafts to perform the same on the simulator. Launch was within one degree. Both had the same carry, dispersion, spin numbers. I would happily game either shaft. Personal preference was to go with the slightly lighter shaft. (Had the KBS Tour 120 previously)

surely the graphite is the material for light shafts and certainly would be better for the elbows

Patrick, I may have missed it in the review, but what makes you believe these shafts will be easier on your elbows than graphite? I too, am just “north of 60” and leaning strongly toward graphite irons in the near future, just to tame the beatings on my elbows, especially when I am forced to hit balls off of a mat. Thanks.

Great review as always.

Do you find the c taper lite plays stiff to flex?

For 95 mph driver swing speed I’m on the fence as to regular or stiff in these.

No, if anything I would say they’re a bit soft to flex. At least that’s how they feel to me.

C-Taper Lites are my favorite shafts. Played them and kept getting pain in my elbows at 35 and couldn’t figure out why til I read other threads. I regrettably had to make the switch. I went to the Steelfibers and the pain went away.

That’s not good to hear. I’ve recently had a little pain myself (age 34), but I can’t really point to the shafts because I’ve hardly played. It is something I’ll keep an eye on – I appreciate the heads up!

How would these shafts compare to the Project X or more specifically the Project X LZ , have been playing Mizuno 900 Forged LZ in stiff but have been hitting ball way too high an am thinking about switching to a slightly lighter shaft (to regain about half a club length distance lost) and slightly lower launching (to stop ballooning my short irons) … Would these or perhaps the regular CTapers be a better fit than the X or X LZ and given that you think they play a little soft to flex, a stiff or perhaps even XS ?

To be blunt, you’re throwing together a lot of shafts that don’t belong in the same conversation. The Project X and the C-Taper are similar – heavy, low launching, tip stiff. The PX LZ – which I don’t have much personal experience with – and the C-Taper Lite are much more active and higher launching.

I think there’s a lot of merit to dropping weight – I’ve done so myself recently – but I would do it with the help of a club fitter like Club Champion or True Spec rather than through self-guided experimentation.

I also was fit into C-Taper lites. Interestingly, I am almost always an S Flex guy, but I was fit into X Flex for the C-Taper lites. They have been great and feel about the same stiffness to me as previous DG S300s. Not sure if that is just feel or whether the lighter weights are actually less stiff within each flex.

I recently got fitted.the Mizuno DNA shaft optimiser. First choice was Project x lz 5.0 shaft…..second was the KBS c taper lite tour 105 regular…..Third was modus 3 105 stiff. Strange that Matt reckons my second and third shaft choice are not comparable…not true according to my fitting.

I switched to C Taper Lites and really liked the performance but after a few months playing with them, by the 6 – 7 hole my elbows hurt to the point that I couldn’t play. I’ve never had that problem before with Dynamic Golds, KBS , etc. It hurt to the point that I played the next few rounds with my other sets with KBS Tours and DG300s and the elbow pain was nonexistent. Switched my gamers to KBS Tours and never had elbow pain again. Might not a problem for sweepers but if you’re a digger like me, stay away from these shafts.

I am looking at either the MP 18 fli hi 3 iron or Srixon Zu65 3 iron for approach shots from around 220, so I am looking for a shaft that is as high launch/spin as possible for stopping power. (not a fan of hybrids)

Would you say this is it? if not what would you recommend?

The C-Taper Lite is not as high launch and spin as possible, but it is higher launching. What weight are you looking to be around?

I currently play project X 6.5 rifle shaft in 4-pw, so ideally looking for something a little lighter than those to increase SS?

Thanks for responding! Tom

You might look at the True Temper AMT Red or the XP models. I haven’t tried the Red but the DG AMT was impressive to me.

Hello Matt. I have recently purchased a set of PXG 0211 irons with kbs tour c taper lite 110 stiff. So far so good. Consistent and very accurate. What are your thought on using the same shaft in my driver. Presently I’m using Aldila nv 65 s.. Opinion would be appreciated

You’re talking about putting a steel shaft in your driver? I’m not sure KBS makes any shaft long enough for that.

Matt, i play the C taper lite 105r, What would be your thoughts for wedge shafts to match? 54 and 58 degree. I have read about soft stepping a 8 iron shaft but i would like your thoughts. Not to much out there that i specific. Thank you

I just play the wedge shaft. It’s worked well so far.

Matt, what would you say is the iron shaft that would promote the highest launch? Steel and graphite?

That’s going to depend entirely on the fit to the individual and the weight you want to be in. Nippon has some great higher launching options, True Temper has the flighted Dynamic Gold series now, KBS has some good options. If you need more launch, make an appointment with a good fitter to find the best option.

Hi Matt, I am playing the KBS Tour 120 gr. Which for me gives me a good dispersion. Getting older, I would like to play a lighter shaft. I tried the KBS c taper lite stiff and loved the fell. They have more kick that the KBS Tour for me. I have a quick transition and I do not want to increase dispersion. I know that you always like heavier shafts in past. Now you are doing well with the 115 gr. Did you have to adjust to them or it was easy? Are they as precise that the Heavier kbs shaft?

The transition from a 120+ shaft to 115 was not a big deal for me. For me, the C-Taper Lite has been as accurate as any iron shaft I’ve played.

HOLA MATT , ES UN PLACER CONTACTARTE, TENGO EN MIS MANOS UN EQUIPO MIZUNO Y LA VARILLA ES KBS TOUR C – TAPER LITE 110 S , MI HANDICAP EN 13 Y MI EDAD RONDA LOS 55 , SI PUDIERA DARME UNA OPINION YO LOS SIENTO MUY RIGIDOS Y PESADOS, GRACIAS.

I’ve recently being fitted for KBS C TAPER 120 S in new MIZUNO 919 Hot Metals. They are what i would consider very heavy compared to what i previously played….. Project x 5.5 rifle. 3 prizes won in 3 weeks….Great…. but here’s my problem….I am hitting 7-PW brilliantly but longer irons 6, and especially 5 & 4 iron, heavy and very poorly compared to the shorter irons., so my question is do you think i would benefit from C Taper lite S 110/115 X in the 4,5 &6 irons….? They are a higher launching shaft with more kick in them yes…?

Yes, the C-Taper Lite is higher launching and lighter than the standard C-Taper. As to whether or not that will solve the long iron problem, there’s no way to know without testing them. If you’re inclined to tinker, you could buy one C-Taper Lite and put it into your 4I and see what happens. If not, I’d suggest meeting with a fitter to figure out if the Lite is a fit.

KBS C Taper 120 S too heavy query. Hi Matt, Happy St Patrick’s Day from Ireland, and thanks for your response. In fairness to the shop where I was fitted they said any problems, then come back and they will work through any issues so I think maybe your advice on the 4 iron might be the way to go..? Or I suspect they’ll try c taper light in a 7 iron..(that’s how I was fitted , on trackman). I like to feel where the clubhead is in my backswing but in the longer irons its like I can’t feel where it is…? I really haven’t been fitted ever before, bar my driver, so I’m no expert. Driver swingspeed is 104mph and 7 iron is 84mph with the C Taper 120 S….at the fitting. Up from 81mph with project X 5.5 in my previous set. (Not fitted for those) . Thanks again for responding to my question. Regards, Ray

Pingback: KBS MAX Graphite Iron Shaft Review - Plugged In Golf

Hi Matt, Thanks for your precise review of c taper life shafts. What would be the expected swing speed or carry distance on 5 iron for regular flex shaft ? I have setup my mind to get a set of constant taper shafts like KBS lites. I like the feel and response of this design Please advise Best regards

Swing speed and resultant distances are totally player specific Nagesh.

– Meeks

How would you compare these to the tour v and $ taper lite?

Both of those shafts have a more active feel than the C-Taper Lite.

Can you compare the normal C-taper 120s to C-taper lite 115x ? I’m currently using C-taper 120s but thinking about moving to lite version but stiffer which is 115x

We have a complete review of the C-Taper here: https://pluggedingolf.com/kbs-c-taper-iron-shaft-review-1/

I cannot find anything on where the KBS Tour C-Taper Lite 105 R. In a Tour Regular, is that in between an standard Regular and standard Stiff? I used to play Project X 5.5, is this similar.

2nd item, the Nippon 105 Regular, how does that lay out compared to standard Regular and standard Stiff.

Thanks in advance!

Yes, Tour Regular is between Regular and Stiff. With regard to Nippon, are you talking about the Modus?

I hit 7 i with 83 mph, and mizuno dna came back with c taper lite X 115 , as TT 120 S300 any tips what you think, is the X not too harsh? john

I don’t find the X harsh. If you’re buying new irons, I would suggest trying both options in a fitting.

Loved the C Taper Lites in my Mizuno’s, but gave them up because of the extreme elbow pain. Now playing the Modus 3 105 without any elbow pain, but liked the KBS shafts better. Must be a lot of vibration in that shaft, but loved the way it felt.

Regarding the comment on elbow pain and vibration in the shaft, a good way to stop vibration and to slightly stiffen the shaft is to fill the shaft with silicone, this dampens the vibration and adds very little weight to the shaft.

Years old thread worth a shot.

Originally fit into elevate tour stiffs. Preformed well but 3 have broken and I’ve read this happens a lot.

I am considering the c taper lites in stiff, would you say they are comparable with launch?

It will depend on the player. For me, they’re not that close.

Your initial review here for the KBS C-Taper Lite was from 2018. These became your gamers.

Several of the commenters said they used this shaft but developed elbow pains from it. While in your bag, did you develop a similar issue?

I ask because of the review you did of the True Temper Elevate Tour were you compared it to the KBS C-Taper Lites. I have liked the TT Elevate on Callaway APEX Pro’s and just bought a used set of Ben Hogan Ft. Worth White with the C-Taper Lite shafts with a 30 day refund. Developing elbow pain will take longer than that to discover.

No, I did not develop any elbow pain as a result of using these shafts.

Good to hear, and thank you for the response.

I love your reviews (and others here on Pluggedingolf) and that they remain available for historical reference. Very informative.

Matt I happened to stumble upon your review of the c taper light and just had a question. I just got fit for irons, I went in with a very open mind and figured I’d settle on what was best for me, spin, dispersion, distance, feel, etc. I got fit for c taper lite 115 xstiff. My concern is the more I read, the more I’m worried these r not the right shafts for me. I hit them very well in my fitting, the best out of the 15 or so shafts i tried… but I’m about a 6hcp with a 100 average swing speed with a 6 iron… would you be concerned or should I trust my fitter? I have not received the clubs yet as I just had my fitting I just was looking for an opinion. Thanks Tom

As a rule, I do not second guess fitters. If there’s a reason that you don’t trust the fitter’s work or what you saw in the fitting, by all means explore another fitting, but nothing in your comment indicates that.

Matt: I went to a fitter and really like the C-Taper Lite. However, the regular and still shafts give me nearly the same results. I swing my 7 iron in the 83-86 range and am a fairly fit 70 years old. Any suggestions as to which flex I should choose for the Srixon SX5? Thanks. Mark

Did you have a preference for the feel of one over the other? If not and all else equal, I’d say go softer and lighter as they’ll work better when you’re a bit tired.

Is this a steel shaft or a graphite shaft? Everything I am reading makes it out to be a steel shaft, but it certainly looks and feels like a graphite shaft.

It’s a steel shaft.

Leave a Comment Cancel

Your email address will not be published. Required fields are marked *

Email Address

Save my name, email, and website in this browser for the next time I comment.

• Boxto Legacy Hybrid Love Golf Shoe Review
• Shot Scope V5 GPS & Shot Tracking Watch Review
• Golf News – April 24, 2024
• Ocean Point Golf Course Review
• Fripp Island Resort – Your Next Golf Destination

Contact Us Advertise Subscribe

Advertise on this site.

Plugged In Golf

Do You Like Free Golf Gear?

Sign up for our weekly newsletter and not only will you get the latest reviews, instruction, and more delivered directly to your inbox, you’ll also be entered into regular giveaways for golf clubs and more.

KBS Tour 105 Shaft Review – Specs, Flex Weight

We know, it’s very tempting to skip a bunch of steps and pick up shafts that you’ve seen pros use on Tour.

After all, you buy basketball shoes that LeBron and KD wear and use them just fine on the court, right?

Unfortunately, it doesn’t work the same way with golf gear. Everyone swings the club differently so you have to be extra careful about which shafts you choose. Some shafts are built to accommodate strong swingers while others are designed for more deliberate swings.

You have to be really careful with your iron shafts too because a lot of holes are made or broken by your iron play. So in the following review, we will be taking a look at the KBS Tour 105 – a shaft that was designed to be a replica of the KBS tour, only more accessible for everyday players.

KBS Tour 105 Overview

When we first got to testing the KBS Tour 105, we had our doubts in both directions.

First we doubted that it would live up to the high standards of the standard KBS Tour. Then we didn’t think that a Tour replica would be truly beneficial for mid and high handicap players.

But let’s start with the basics. The KBS Tour 105 had an active feel that made an impact almost immediately. You could feel the energy from your swing transfer almost automatically as you unloaded the shaft. Next, the KBS Tour 105 was designed to be lighter than the standard KBS Tour shaft but to have the same feel.

For those of us who were familiar with the standard KBS Tour, we were able to attest to the fact that the smooth, active transition is still intact in the KBS Tour 105. And we can also attest to the fact that yes, the KBS Tour 105 feels lighter. The overall feel is on the stiff side, which is to be expected from a shaft that is supposed to be a Tour replica.

Still, you don’t get a “shock” in your hands and wrists when you mis-hit. Overall, we have to say that they did a good job of maintaining the Tour feel in the KBS Tour 105 shaft.

Why is KBS Tour 105 So Popular?  

If a shaft has “KBS” in front of its name, it’s going to get a lot of attention.

The brand is what draws people in; but the crisp feel and accuracy are what make people fall in love with this shaft.

How Does the KBS Tour 105 Perform?

As we mentioned, the KBS Tour 105 has a nice, active feel to it.

So it felt like little was lost in translation in terms of swing energy. Our mid and handicap testers were also having a good time with the lightweight design of this shaft. It definitely helped them get their swing speed up.

However, for our faster swinging testers, the KBS Tour 105 presented a bit of a problem. Shots were flying off-line and for the most part, it was because they weren’t adapting their tempo. Players who have fast tempos will need to tune things down when they use the KBS Tour 105 shaft. The KBS Tour 105 was built for a deliberate and smooth transition.

But that was really the only caveat in terms of performance. The KBS Tour 105 launches high without getting out of control. What you end up with is a good rise that leads to a nice plateau and an easy landing. The spin was also pretty pleasing. Again, it was a controlled spin that added to the stopping power of the steep descent angles we were getting.

KBS Tour 105 Shaft Specs Table

What flexes are available what swing speeds do they suit.

  Regular, stiff and extra stiff flexes are available.

Regular is a good choice for sub 80 MPH swing speeds. Stiff would accommodate 85-90 MPH swingers and extra stiff is good for 90-95 MPH swing speeds.

What Weights Are Available? What Swing Speeds Do They Suit?

There are various weights but the 125-133 gram range would be best for fast swingers with slightly more aggressive tempos.

110 to 120 grams is where you wanna be if you have a naturally smooth tempo.

Why is it So Good?  

For us, what makes the KBS Tour 105 so good is that it faithfully replicates the performance of the KBS Tour shaft but makes it more playable for slower, more deliberate swingers.

KBS Tour 105 First Impressions

Our first impression was that the KBS Tour 105 looked and felt a lot like the standard KBS Tour – only with a crisper feel.

Key Features & Performance  

The best feature is that the KBS Tour 105 is lighter than its Tour-weighted counterpart.

It yields a mid launch and moderate spin while offering an active feel at transition and impact.

KBS Tour 105 Iron Review

So long as you maintain a smooth tempo, you can expect world-class consistency from this shaft with all your irons.

KBS Tour 105 Wedges Review

We liked that we were able to work the ball effectively up-and-down with our wedges. The KBS Tour 105 promotes a soft landing and moderate spin so it’s a bit easier to land fast greens from tight lies.

KBS Tour 105 Pros & Cons

• Responsive feel
• Great for smooth tempos
• Good shot shaping ability
• Controlled launch
• Similar feel to the standard KBS Tour
• Difficult for fast tempos
• Plain design

Overall Score: 95/100

Check out more reviews here:.

Who Should Buy it?

As we mentioned, it is also ideal if you have a slower swing tempo so we would assume that most aggressive swingers wouldn’t have a great time with this shaft.

Still, the KBS Tour 105 would be a great option for anyone who likes the feel of the KBS Tour, but needs a lighter shaft.

Project X Denali Blue 60TX Shaft Review - Specs, Flex, Weight

Fujikura 2024 Ventus Blue Shaft Review - Specs, Flex, Weight

Project X Cypher Vs HZRDUS Smoke Shaft Comparison

Mitsubishi Tensei Vs Project X Cypher Shaft Comparison

Tour AD DI Hybrid Shaft Review - Specs, Flex, Weight

Nippon Modus 105 Vs Project X 5.5 Shaft Comparison

Dynamic Gold X100 Vs Project X 6.5 Shaft Comparison

Project X 6.5 Vs KBS Tour X Shaft Comparison

Nippon 950 Vs Nippon Modus 105 Shaft Comparison

© 2022  Amazon Associates Program. Golf Blue Heron is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. *Amazon and the Amazon logo are trademarks of Amazon.com, Inc., or its affiliates.

• Best Golf Products
• Garmin s60 vs Garmin s40 vs Garmin s20
• Golf Driver Comparisons
• Golf Iron Comparisons
• Home Of Golf
• Putt-A-Bout Indoor Putting Mat Review

KBS Tour 105 Shaft Review

Kbs tour 105 shaft.

Not all golf swings are created equal.  That’s a fancy way of saying, “we all swing the club differently.”  As such, a golf shaft will often feel and perform totally different between two different people.  Take, for instance, the KBS Tour iron shaft.  It’s one of the most popular aftermarket steel shafts in the game largely due to its feel.  The thing is, some players want that feel, but need a little less weight with more launch and spin.  KBS created a slightly lighter-weight version of the Tour shaft to promote a higher ball flight and higher spin rates .  That shaft is the KBS Tour 105.

How Does it Feel?

This statement is going to be pretty profound, but it’s totally true.  The KBS Tour 105 feels very similar to the standard Tour, but lighter.  There’s a great smooth feel like you’d expect from KBS with a gradual flex profile .  The profile is still somewhat firm with a stiffer tip section to maintain the Tour feel reputation.  It could just be my hands, but the 105 also felt a little more crisp to me as a result of the lighter weight.  The lighter weight also makes the shot feedback a little sharper.  There’s more response from the shaft to your hands, but little impact to the sting factor so your hands are nice and safe.

On-Course Performance

In terms of shot shaping and general control, the KBS Tour 105 performed very similar to the Tour.  I had a similar “built-in” draw and was able to manipulate my shot as necessary.   However, I had a very different launch and spin experience.  A good shot would leave the club face with a nice rising flight to a higher peak.  My launch angles were higher, but they weren’t over the top.   Rather than hitting balloons, the Tour 105 allowed me to play a strong flight but with a good rise and a soft landing.  Need to hood one and drive it low?  The Tour 105 will do it if you know how to hit that shot.

One thing I would feel remiss if I were to not mention it is tempo.  There are definite performance benefits to be had with a lighter weight shaft.  You can pick up swing speed, higher ball flights, maybe a more precise response, etc.  BUT, I generally find a lighter shaft is more dependent on just the right tempo.  With the Tour 105, every single bad shot could be traced to bad tempo in my swing.  Typically too aggressive.  As long as I had a nice smooth and easy tempo, I hit an excellent shot.  My point is you need to be aware of your tempo with these lighter shafts.  I believe a smoother tempo is the optimal player for this shaft.

Final Thoughts

The KBS Tour 105 really delivers exactly as advertised.  If I made a smooth-tempo swing, I had a strong rising ball flight with enough extra spin to keep the ball in the air and give me a soft landing at my target .  While this performance was quite a bit different for me than the KBS Tour, the Tour 105 is clearly closely related to the original Tour shaft.  In my opinion, the KBS Tour 105 is great for the player that likes the feel of the Tour but wants a little more carry and a higher ball flight .

Related Posts:

Would you consider this a high spinning shaft or a mud spinning? Thanks

100% depends on the player’s swing. If you’re a steep swinger with a lot of speed, it will absolutely spin a lot. If you are shallow with a positive angle of attack and lower speeds, you won’t see an over abundance of speed.

I use these shafts (reg) in my irons and I love them – wondering what kind of driver shaft set up I should use to get best match ? Cheers

That’s a tough one. The reality is that fitting your driver shaft to an iron comparison isn’t going to translate all that well so you really do need to test that independently. At least that’s my thought on it.

Hello and thanks for your article Bill I went after years in kbs 120 flt Stiff for 105 Tour lite S, that is a game changer, so easy to play, my GIR et my score became crazy, i have to share this to shaft’s seekers and… i have a question! The fact this shaft is so good for me can give a tendance in what kind of Drivers shaft can suit me? Is theire any logic to apply? Thanks a lot for your advice if you have time

I’m pretty of the mindset that it’s tough to say “if I hit X in my irons, then Y shaft would be good for my driver”. Chances are you move the clubs a good bit different and really should get fit just the same.

Leave a Comment Cancel

Your email address will not be published. Required fields are marked *

Email Address *

Save my name, email, and website in this browser for the next time I comment.

KBS Tour vs C Taper Shafts: Comparison

KBS Tour vs C Taper Shafts – which is better for your game? Well, they have a similar profile but there are some subtle differences that are important to note. Keep reading to learn what this are and how you can choose the right one out of the two. 

Without a good shaft, your golf club will be incomplete. This is why pro golfers are not just concerned about their game but also their tool, one of which is the shaft.

Though there are dozens of brands out there, the KBS series seems to be one of the best. They have been reviewed in several pro golfer publications and have been around for quite a while.

Two of their most popular shafts are the KBS C Taper and Tour. If you’re reading this, you probably got a recommendation to buy either of them.

While we can’t authoritatively say one is better than the other, they actually have some differences that can make you want to pick one over the other.

This short article exposes the differences so you can choose the right one. Let’s look at their profile and features and who should be using which:

KBS Tour vs C Taper Shafts: Which Is Better?

Before comparing the two, let’s first look at the profile, features, and performance of each shaft.

The performance will be based on how we translate the features into benefits and the experience of those who have used them. Your experience with the shaft may vary but should be close.

So let’s begin with the C Taper:

KBS C-Taper Shafts

The KBS C-Taper iron shafts are among the least striking and twirling steel shafts in golf.

The KBS C-Taper shaft, coupled with a characteristic KBS design, increases power transmission for a crunchy grip whilst also maximizing shaft lengths in the taper and tip zones for minimal arc and rotation stabilization.

The C-Taper is the ultimate iron shaft for those who want to take low-cutting shots with great stroke control.

When your irons have the proper flex, the C-Taper is one of the most sensitive and precise iron shafts when striking.

In terms of distance, the KBS C-Taper is comparative to the player and provides a 5 percent longer range.

Specifications

The KBS C-Taper steel shaft comes with five loads and flexibility options.

Mass ranges from 110gm and 130gm, with flexibility increasing with mass. There is a normal, systematic, rigid, rigid plus, and additionally rigid variants, each with its unique load structure.

Each load and flexibility spectrum is designed to generate a deep ball trajectory with little rotation and greater management.

KBS Tour Shaft

The KBS Tour shaft was created for golfers of different skill levels.

The Tour shaft is a semi-course steel and tapered shaft that provides a characteristic soft touch to the golfer.

The KBS Tour increases dynamism transition to provide greater uplift and better release with wrought iron and tapered blocks.

Non-professional gamers will like the KBS Tour’s reactive grip. Why? Because it’s built to serve the right components to key in their games

The handling of this top-notch golf rod is equally acknowledged by many of the globe’s greatest golfers.

Significant Features A 5 percent reduced arc, reduced twist, and increased length provide golfers with a convenient steel shaft that complements their swaying.

The comfortable and reactive KBS distinctive touch gives golfers additional alternatives at reduced wagging velocities.

The KBS Tour is suitable for golf enthusiasts of practically every price choice because of the variety of leverage and flexible alternatives.

The KBS Tour steel shaft is available in six distinct variants. The KBS Tour is provided in 110gm standard, 115gm regular plus, 120gm rigid, 125gm rigid plus, and 130gm extra-rigid weights and flexes.

Every shaft is accessible in ranges from 1 iron to lob wedge and may be individually tailored to players of any physique.

KBS Tour or KBS C Taper Shafts?

The KBS Tour shaft is an excellent choice for golfers who don’t sway the golf club aggressively.

The KBS Tour shaft is ideal for modest median and higher handicapped golfers who seek greater responsiveness and a better grip on their clubs.

On the other hand, the KBS- C Taper Shaft is ideal for golfers who want to smash modest penetrating hits with amazing aims and accuracy, as well as a more ultrahigh sway that allows you to strike the target more precisely and traverse more range.

Related Posts:

• Bridgestone B330 RX vs E6: Which Is Better?
• Bridgestone B330 RX vs Srixon Z Star: Which Is Better?
• Ping Anser 3 vs Anser 2 Putters: A Comparison

Want to Get Better at Golf?

Get "ben hogan's five lessons" and join thousands of others improving their golf skills..

Learn the Fundamentals: Stance and Posture > Golf Grip > The Swing.

This book has LOADS of positive reviews. THOUSANDS OF REVIEWS. A MILLION COPY SOLD. CHEAP!

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

KBS C-Taper Lite vs. Nippon Modus 105: Which Shaft Will Improve Your Game?

Golf is one of the most popular games worldwide. A Golf shaft is a long metal cylinder that connects the golf club to the handle. C-Taper Lite and Modus are both manufacturers of golf shafts that make premium quality golf shafts. 

The first distinction between C-taper Lite and Modus is their weight, flexibility, and length. C-taper Lite is lighter and is made for people with moderate swings. The Modus fits best for people with high swings because of its weight. 

Both of the shafts are of good quality and popular among players. We will discuss some noteworthy differences to help you decide the best shaft for you. 

Overview Of C-Taper Lite

C-taper Lite is a production branch of the KBS corporation. KBS tour shafts were established in 2008 and, since then, have grown popular among golfers. 

It is the fastest-growing shaft production company in the casual and professional scene. Many well-recognized professional players prefer KBS C-taper and C-taper Lite as their golf shafts. 

According to most reviews, this shaft provides a perfect mix of comfort and performance for the players. 

Pros And Cons Of C-Taper Lite

Because this has a firm tip compared to the Modus and a less stiff butt, you can expect greater arc and trajectory when using the C-taper Lite. 

Read Also: Project X IO vs LZ: Which One To Pick? 

Overview Of Modus

The Modus is a release lineup of Nippon, a Japanese shaft manufacturer recognized worldwide. It is the most popular shaft manufacturing industry in Asia. 

They have been producing shafts since 1959. They make stiff, metal, and lightweight shafts and are pretty popular in the professional scene of golf. This has been the uncontested most popular shaft on LPGA tours. 

Pros And Cons Of Modus

Nippon uses high-quality materials for Modus and promises superb durability in most weather conditions. This shaft can also handle the strongest players. 

The best part about Modus, though, is the consistency. Each shaft carries the same performance and builds quality. The players also reported feeling great when using a Modus shaft on their iron. 

C-Taper Lite Vs Modus: Comparison Chart

The features which stand out the most regarding the shaft of a golf club are its flexibility, feel, weight and length. The International golf federation has some strict standards set for these characteristics. 

Nippon Modus is one of the earliest manufacturers of golf shafts. They make the highly popular Modus golf shaft. On the other hand, KBS, maker of the C-taper Lite, is relatively new but is the fastest-growing metal shaft manufacturer worldwide. 

The Modus is lighter. It has a stiffer butt to allow high-trajectory shots. On the other hand, the C-taper Lite is perfect for mid-high swing golfers. 

Here’s a comparison chart showcasing these factors about both shafts to help you make your decision better. 

Read Also:   Modus 105 Vs 120: Which Is The Better Golf Shaft?

What Are The Differences Between C-Taper Lite And Modus?

There are some apparent differences between the two popular golf shafts. But these little differences in features change how the club feels about different players with different strengths and playstyles. 

Even though the KBS tour C-taper Lite is one of the most popular and top three premium brands that produce club shafts, they might not be suited for everybody. 

The first notable difference is flex. The original C-taper was meant for less flexible people. The new C-taper Lite retains this quality of the original. But on top of it, the C-taper Lite removes the excess weight on the shaft while maintaining the same backswing speed you get from the club. 

The C-taper Lite has a softer butt compared to the Modus. A more delicate butt is perfect for players with an average speed and a mid-high swing. 

On the other hand, for players who have a high-speed swing, the Modus is a better option. Modus’s shafts are premium quality and made chiefly for players with a medium swing. 

But the subsequent lineups in the Modus series have a very stiff butt and can give a lower lift, making it perfect for the strongest players. 

Build Material

The C-taper Lite is a lightweight version of the original C-taper that uses hollow light metals to reduce weight. C-taper is the best option for people who have a high swing and want more lift on their shot and more spin to their ball. 

Credit to the flexibility and wedge on the steel bar, this shaft gives the user more control over the ball’s trajectory. The shaft itself feels very smooth for the user. 

Due to technological advancement, C-taper shafts are robot tested before release. The tests ensure energy transfer stays at maximum efficiency when the golfers take a shot every time. 

The standout feature of Modus shafts is that they have a customized wedge on a steel shaft. This modified feature allows players to add more spin to their shots, which helps the ball to glide against the wind better. This also allows a more incredible trajectory for the ball.

Read Also:   KBS tour 90 vs 105: Which Golf Shaft Will Improve Your Game?

Another feature that needs to be mentioned is how this shaft’s design allows the players to sustain no damage to their elbows. Swinging the club, especially for stronger players, can cause a lot of traumas if the shaft is too stiff. 

A mid-kink point gives the shaft and the club almost perfect aiming independence. You will have a better time landing the ball where you intend to without exerting tremendous pressure or hurting your elbows. 

Players can execute these shots and reduce their chances of hurting themselves. It is manufactured with precision and aims for players with a medium swing. These features are prominent in the Modus, but The Lite has some lackings considering the safety of aggressive players. 

Both of these shafts come in similar sizes. But the prime difference is that the Modus can be customized to have a little more length than the C-taper Lite. This can help you in choosing the breaking point you want to hit. 

One thing to remember is the permitted limit of the shaft’s length. The highest size one can have is 46 inches. Beyond that, it becomes illegal. 

The Modus is lighter compared to the C-taper Lite. But beyond that, you can also get more weight options for the Modus. The later versions of the Modus have lighter weight. 

USGA also has a permitted limit for a golf club’s weight, including the shaft. But, according to USGA, Modus and C-taper Lite versions are both legal so you can choose either.

Read Also:   KBS $ taper lite vs c taper lite: Which one should you choose?

Regarding the C-taper Lite, thanks to the increased spin on the golf ball, you can position your shot better and aim it, so it lands properly on the grass. It is perfect for people who have an aggressive tempo because of the higher lift you get. 

The Modus has some of the lightest shafts ever produced and is lighter than the C-taper Lite. This lighter weight allows dimensions like higher speed, trajectory, and straighter shots.

The C-taper Lite is the best shaft for mid-swing players who want more trajectory and spin on their shots. This shaft is light, tested, and promises peak performance. 

If you have used KBS tour C-taper before and like its feel but want to add a little swing to get the club around more effortlessly, you might want to check out the C-taper Lite. 

Availability

Modus has an availability issue. It’s often unavailable in small retail shops, which increases its price. But Modus remains a premium quality shaft, well accepted by many professional players.

C-Taper Lite Or Modus: Which One Should You Choose?

Can you make your decision regarding C-taper Lite vs Modus yet? They are both incredibly well-built shafts with a combination of feel, performance, and durability. 

Depending on your playstyle and how you like your trajectory, you can choose one of these shafts. For mid-high swings, you should go for C-taper Lite, and anything above, Modus is perfect.

Read Also: Elevate Tour vs Elevate 95: Which Golf Shaft Should You Choose?

Frequently Asked Questions

The C-taper lite and Modus are excellent shafts to revamp your golfing style. But while choosing one, you might need clarification about some tidbits. Here are some frequently asked questions regarding C-taper Lite and Modus.

What is a C-taper Lite shaft?

C-taper Lite is a lightweight version of the C-taper series golf shafts. These are perfect for having a great spin and a mid-high trajectory on your shots. 

How many grams is the C-taper Lite?

The weight of the C-Taper Lite varies based on flex. Parallel tips and taper tips decide the difference in the shaft’s weight. For taper, it’s 115 grams, and for average tips, it’s 105.

What material is C-taper Lite?

The shaft itself is made with brushed steel. Because of this, they have a premium look that stays permanent and rust-proof. 

Meet Jalal, a passionate golf writer and the driving force behind Golfertroop.com, your go-to destination for all things golfing! Whether you’re a seasoned golfing veteran or a beginner taking your first swing, Jalal is here to assist you in making the most out of your golfing experience.

Similar Posts

Ping Rapture V2 Driver vs. G25: Which One Reigns Supreme?

Are you currently looking into Ping drivers? PING Rapture v2 and PING G25 are great drivers to choose from. However, are you unsure about the…

Srixon Z Star vs Titleist Pro V1 | Which Golf Ball is Better?

While looking for a first-rate golf ball, it’s hard to decide between Srixon Z Star and Titleist Pro V1. Despite being manufactured by two different…

Titleist Pro V1x vs. Pro V1x Left Dash: Comparing Golf Balls

People who play golf are very familiar with the name Titleist. They produce the best products like Pro V1x. Because Pro V1x has a Left…

TaylorMade M1 vs PSi Irons: Which One Is Right For You?

TaylorMade M1 vs PSi Irons, Which one is right for you? According to our in-depth research, the PSi irons are comparatively better than the M1….

Callaway Apex 21 vs. Taylormade P790: Which Iron to Choose?

Callaway Apex 21 and Taylormadep790 are well-known irons. Both golf irons are designed to provide explosive distance and maximum forgiveness without sacrificing workability. It is…

Callaway Epic Max vs TaylorMade Epic SIM2 Max Driver: Which One Fits Your Needs?

Have you been looking for a new driver to boost your gameplay on the golf field? Have you been hesitant about which driver to purchase:…

The PGA Tour’s 7 best ball strikers and their iron selections

Scottie scheffler, xander schauffele, corey conners, ludvig aberg, cameron young, keith mitchell.

Notable Places in the Area

Elektrostal Satellite Map

Popular Destinations in Moscow Oblast

Escape to a random place.

Simulation of the sulfide phase formation in a KhN60VT alloy

• Simulation of Metallurgical and Thermal Processes
• Published: 23 September 2017
• Volume 2017 , pages 447–453, ( 2017 )

Cite this article

• I. V. Kabanov 1 ,
• E. V. Butskii 1 ,
• K. V. Grigorovich 2 &
• A. M. Arsenkin 2  

33 Accesses

Explore all metrics

The conditions of the existence of sulfide phases in Fe–Ni–S alloys and four-component Fe–50 wt % Ni–0.001 wt % S– R ( R is an alloying or impurity element from the TCFE7 database) systems are studied using the Thermo-Calc software package and the TCFE7 database. The modification of nickel superalloys by calcium or magnesium is shown to increase their ductility due to partial desulfurization, the suppression of the formation of harmful sulfide phases, and the uniform formation of strong sulfides in the entire temperature range of metal solidification. The manufacturability of superalloys can decrease at a too high calcium or magnesium content because of the formation of intermetallics with a low melting temperature along grain boundaries.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price includes VAT (Russian Federation)

Instant access to the full article PDF.

Rent this article via DeepDyve

Institutional subscriptions

Similar content being viewed by others

Modeling Thermophysical Characteristics of Nickel-Based Superalloys

Phase field modeling of solidification in multi-component alloys with a case study on the Inconel 718 alloy

Phase-Field Simulation of Microstructural Evolution in Nickel-Based Superalloys During Creep and in Low Carbon Steels During Martensite Transformation

H.-P. Chen, R. K. Kalia, E. Kaxiras, G. Lu, A. Nakano, N. Kenichi, A.C.T. van Duin, P. Vashishta, and Z. Yuan, Physical Review Letters, No. 104, 155502 (2010).

Article   Google Scholar  

F. Kristofory, M. Mohila, D. Mikulas, and J. Vitec, Acta Metallurgica Slovacia 10 (3), 236–241 (2004).

Google Scholar  

J. Morscheiser, L. Thönnessen, and B. Friedrich, “Sulphur Control in Nickel-Based Superalloy Production,” in Proceedings of Conference on EMC (2011), pp. 1–15.

Software Package. Thermodynamic Calculations of Phase Diagrams for Multicomponent Systems . http://www.thermocalc.com.

Download references

Author information

Authors and affiliations.

OAO Metallurgical Plant Elektrostal’, Elektrostal’, Moscow oblast, Russia

I. V. Kabanov & E. V. Butskii

Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences, Moscow, Russia

K. V. Grigorovich & A. M. Arsenkin

You can also search for this author in PubMed   Google Scholar

Corresponding author

Correspondence to E. V. Butskii .

Additional information

On the Centenary of Plant “Elektrostal”

Original Russian Text © I.V. Kabanov, E.V. Butskii, K.V. Grigorovich, A.M. Arsenkin, 2017, published in Elektrometallurgiya, 2017, No. 3, pp. 13–21.

Rights and permissions

Reprints and permissions

About this article

Kabanov, I.V., Butskii, E.V., Grigorovich, K.V. et al. Simulation of the sulfide phase formation in a KhN60VT alloy. Russ. Metall. 2017 , 447–453 (2017). https://doi.org/10.1134/S0036029517060106

Download citation

Received : 21 November 2016

Published : 23 September 2017

Issue Date : June 2017

DOI : https://doi.org/10.1134/S0036029517060106

Share this article

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• addition of calcium and magnesium
• strong sulfides
• grain boundaries
• intermetallics
• melting temperature
• Find a journal
• Publish with us
• Track your research

$ 64.95

TOUR FEEL. MONEY PERFORMANCE.

Kbs retrobuild.

The KBS Retrobuild allows you to customize every piece of your build from grip down to the label. Your clubs – Just better. Start Your Build >

KBS Find Your Fit

The KBS custom online fit tool allows every golfer to explore different shaft options based on their swing. Finding your fit just got easier. Get Started >

KBS Golf Experience

From custom builds to swing analysis to custom KBS gear – Our goal is for you to leave as a better player. Explore Now >

TAPER TIP TECHNICAL SPECIFICATIONS