cruise control switch e45

• Forum Listing
• Marketplace
• Advanced Search
• Technical (VW & Audi)
• VAG-COM Diagnostic Forum

17977 - Cruise Control Switch (E45): Implausible Signal

• Add to quote

I noticed my cruise control isn't working anymore in my 2000 GTI 1.8t. I scanned my car for trouble codes and found this code. 17977 - Cruise Control Switch (E45): Implausible Signal P1569 - 35-10 - - - Intermittent Any ideas? My cruise control swaltch still works, becuase I am still to swith from stock to 93 octane APR programming. Thanks, Brandon http://****************.com/smile/emthup.gif  

Re: 17977 - Cruise Control Switch (ianlee77) I'm guessing I need a new cruise control stalk, but I still have to hook it up to VAG-COM to do some testing... Anyone else have the same problem?  

Re: 17977 - Cruise Control Switch (E45): Implausible Signal (dieselgti) Mine had the same issue, dealer is changing the cut out switch on the clutch pedal system next week. Bentley shows a momentary contact switch in the clutch linkage to disable the cruise when you shift. Switch is $17.00 or so.  

my cruise doesnt work, but get no error codes on VAG-COM  

Re: 17977 - Cruise Control Switch (dieselgti) i had dealer replaced the stalk and that solved it. $$$  

Re: 17977 - Cruise Control Switch (ianlee77) I had my stalk replaced about a year ago, so I'm thinking that it possibly was not done right.. I have this same code & my cruise control will only work for a few mins before shutting off. I guess maybe I should take it back to the place and see if they will fix it? I'm guessing since its been a year they might be reluctant to do anything for free... Anyone have any other thoughts on what could be causing it?  

• ?            
• 84.5M posts
• 1.5M members

Top Contributors this Month

20% off orders over $100* + Free Ground Shipping**

Eligible Ship-To-Home Items Only. Use Code: JUNEDEAL

Ford E450 Super Duty Cruise Control Switch

Buy Online. Pick Up In-Store.

1 - 6 of 6 Results

Duralast Switch SW7291

• Part # SW7291
• SKU # 207154

Duralast Switch SW8194

• Part # SW8194
• SKU # 85101

Duralast Switch SW8195

• Part # SW8195
• SKU # 85102

Dorman Switch 901-625

• Part # 901-625
• SKU # 1132240

Motorcraft Switch SW-6349

• Part # SW-6349
• SKU # 81127

Motorcraft Switch SW-6350

• Part # SW-6350
• SKU # 81122

YEAR RANGE FOR Ford E450 Super Duty

• 2017 Ford E450 Super Duty Cruise Control Switch
• 2016 Ford E450 Super Duty Cruise Control Switch
• 2015 Ford E450 Super Duty Cruise Control Switch
• 2014 Ford E450 Super Duty Cruise Control Switch
• 2013 Ford E450 Super Duty Cruise Control Switch
• 2012 Ford E450 Super Duty Cruise Control Switch
• 2011 Ford E450 Super Duty Cruise Control Switch
• 2010 Ford E450 Super Duty Cruise Control Switch
• 2009 Ford E450 Super Duty Cruise Control Switch
• 2008 Ford E450 Super Duty Cruise Control Switch
• 2007 Ford E450 Super Duty Cruise Control Switch
• 2006 Ford E450 Super Duty Cruise Control Switch
• 2005 Ford E450 Super Duty Cruise Control Switch
• 2004 Ford E450 Super Duty Cruise Control Switch
• 2003 Ford E450 Super Duty Cruise Control Switch

Related Parts & Products

• Ford E450 Super Duty Automatic Transmission
• Ford E450 Super Duty Lug Nut
• Ford E450 Super Duty Transmission Filter (A/T)
• Ford E450 Super Duty Transmission Seal
• Ford E450 Super Duty Transmission Oil Cooler Hose
• Ford E450 Super Duty U-Joint
• Ford E450 Super Duty Transmission Mount
• Ford E450 Super Duty Wheel Stud
• Ford E450 Super Duty Transmission Cooler Line Assembly
• Ford E450 Super Duty Transmission Torque Converter

Related Makes

• Buick Cruise Control Switch
• Cadillac Cruise Control Switch
• Chevrolet Cruise Control Switch
• Chrysler Cruise Control Switch
• Dodge Cruise Control Switch
• GMC Cruise Control Switch
• Lincoln Cruise Control Switch
• Jeep Cruise Control Switch
• Saturn Cruise Control Switch

Related Models

• Ford F150 Cruise Control Switch
• Ford Focus Cruise Control Switch
• Ford Escape Cruise Control Switch
• Ford Explorer Cruise Control Switch
• Ford Ranger Cruise Control Switch
• Ford Mustang Cruise Control Switch
• Ford F250 Super Duty Cruise Control Switch
• Ford Taurus Cruise Control Switch

Advice and How-To's

• Is it Safe to Drive with a Cracked Windshield?
• 5 Best Father’s Day Gift Ideas for Car Lovers
• How Many Miles Can You Drive After the Gas Light is On?
• How to Fix a Leaky Sunroof
• What Are the Different Types of Car Window Tint?
• What Does SAE Mean?
• How to Tell if Your Car Frame is Damaged
• Is it Safe to Drive with a Bent Frame?
• How Much Does a New Car Key Cost?
• Where Are The Jacking Points on a Car?

Please register or login to enable Dark Mode.

• Manage Preferences

Forgot your Password?

•   AudiWorld Forums
• Audi Models
• Audi S4 / RS4
• S4 / RS4 (B5 Platform) Discussion

DTC: 17977 - Cruise Control Switch (E45): Implausible Signal 35-10 Intermittent

• Forum Listing
• Marketplace
• Advanced Search
• Volkswagen Passat Discussion
• Volkswagen Passat B5 Discussion

cruise control inop

• Add to quote

ok so my cruise control hasnt worked since i got this car and im ready to fix it . this is a 00 passat 2.8 auto trans. crusie does not work and the light does not come on in the dash , i have checked ecm programming to make sure it has cruise enabled .there is a code for the cruise control which is 17977 - CRUISE CONTROL SWITCH (E45) P1569 - 35 - 10 - IMPLAUSIBLE SIGNAL - INTERMITTENT i checked the code on ross tech and heres what it says 17977/P1569/005481 - Cruise Control Switch (E45): Implausible Signal Possible Symptoms Cruise Control not working Possible Causes Wiring and/or Connector(s) from/to Engine Control Module (ECM) faulty/incomplete Cruise Control Switch (E45) faulty Possible Solutions Check Wiring and/or Connector(s) from/to Engine Control Module (ECM) Check/Replace Cruise Control Switch (E45) Check Measuring Value Blocks (MVB) Special Notes If the Cruise Control System (CCS) was retrofitted, check the Wiring to the Engine Control Module (ECM). Depending on the Make, Model and Model Year the Hardware Signal can originate from one of the following Sources: Cruise Control Switch (E45) Steering Column Control Module (J527) Central Electronics / Body Control Module (J519) ok i havent taken apart my column and checked in there but all other wires appear ok, im new to vag com and im unsure how to check mvb for the cruise control  

There isn't much to the cruise control on drive-by-wire models; it's essentially a switch, and software. 99% a new switch will fix it.  

Do the brake lights work, if not, replace fuse F13.  

Yes brake lights do work Sent from AutoGuide.com Free App  

Check the CC Switch & wiring at the brake pedal, if OK, check the switches & wiring on the indicator stalk and/or steering wheel.  

• ?            
• 159.9K members

Top Contributors this Month

• Search forums
• Technical Discussions
• DIY + Maintenance + Tips/Tricks

DIY: Crusie Control Stalk Repair

• Thread starter mystix
• Start date Aug 11, 2015

Passed Driver's Ed

• Aug 11, 2015

The Cruise Control stopped working on the car so I had it scanned by someone with a vagcom cable and this is what the scan reported. Address 16: Steering wheel Labels: 1K0-953-549-MY8.lbl Part No SW: 1K0 953 549 BD HW: 1K0 953 549 BD Component: J0527 036 0070 Coding: 0002022 Shop #: WSC 01279 785 00200 VCID: 75E1E9A31CE3BA9675-8020 Subsystem 1 - Part No: XXXXXXXXXXX Component: E0221 002 0010 1 Fault Found: 00895 - Cruise Control Switch (E45) 014 - Defective According to Ross-Tech it is usually a dirty connector so I popped off the back cover for the cruise control stalk, removed the plastic assembly from the circuit board and while I didn't immediately realize that the carbon buildup on the circuit board was not normal, I did notice that one of the wires running down the stalk was cut so I took the challenge or repairing the wire and cleaning the carbon of the contacts. I decided to make a DIY out of this and this is my first ever attempt at making a walk-through guide ever and I have to appreciate the effort people put into making their DIYs because it is a very tedious process. I am simply going to post my pictures and hopefully people will be able to follow along. Once the process is completed my cruise control didn't work until I disconnected the battery terminal and re-connected it. My guess is once the fault is logged the system doesn't re-check the controller. For people with vagcom maybe you can simply clear the code and don't need to disconnect battery. I am also missing a few steps so I will summarize in point form below what needs to be done and you can use the pictures as guides. 1) Start by unlocking the steering lever at the bottom and push the steering wheel out all the way. 2) Remove the top cover by first pushing out the trim piece from the instrument cluster area and then follow up by separating the top cover from the bottom cover. 3) Remove the two screws holding the bottom cover from the column. 4) Remove the two small silver screws on the cruise control stalk. The top one is visible in the picture just above the screw holding the bottom cover. 5) Unclip the black plastic ring around the base of the cruise control stalk. It won't come out yet, just free it for now. 6) Remove the back cover of the stalk, simply unclips. 7) push out the cruise control assembly and remove the two screws to disassemble it. If your circuit board looks like mine (covered with carbon) then use a screw driver to scratch it off until the golden contacts are visible. 9) Remove the black plastic ring from step 5. 10) Now we need to free up the wires so we can easily repair them. Pull the stalk forward which will allow the base assembly to part in the middle. You can pull forward enough for the stalk to dislodge a little bit so there's enough gap in the base of the assembly. 11) Pull your wires out and repair them. I admit I did a shitty job and re-joining them but I'm content with my effort. Most people would probably use heat shrink and solder the wires but alas, like I said, contempt. Also my MAF sensor wires are re-joined at multiple points just by twisting and have been left exposed for the last 4 years and the CEL hasn't returned. 12) Now that the repair is completed run the wires back into the assembly. 13) Put back the black plastic ring and clip it in. 14) re-assembly the circuit board and plastic assembly, be sure to clean your contacts! 15) screw back the base assembly (top and bottom screws) and the back cover. 16) Now put on the bottom steering column cover and screw it back in. 17) The top cover has a semi-circular end which is suppose to click into back of the bottom cover. Pop them into position and you should be able to pivot the top cover, and then bring the top cover down and let it click back into the bottom cover and then re-insert the trim piece into the instrument cluster. At this point you should have a functioning cruise control system. I hope this DIY is helpful.  

Attachments

Here's the rest of the pictures.  

umliu365liu

• Apr 5, 2017

Excellent DIY instruction. I wish I saw this before I fixed mine. Mine was the blue wire. Just broke exact like yours. I think something interesting going on when VW put those parts together. Anyway. Thanks.  

• Search forums
• TDI Model Specific Discussions Areas
• VW MKV-A5 Golf/Jettas

'09 JSW 6MT time for a new cruise control switch? VCDS thinks so...

• Thread starter MP517PRCT
• Start date Feb 22, 2017

Veteran Member

Driving home to eastern PA from visiting the in-laws in Pittsburgh on Monday, my cruise control stopped working about 100 miles from home. Yesterday and today's morning commute, the cruise worked once and then died. I ran VCDS last night and these error codes came up... 001384 - Cruise Control Switch (E45) P0568 - 000 - Implausible Signal - Intermittent Freeze Frame: Fault Status: 00100000 Fault Priority: 2 Fault Frequency: 6 Reset counter: 255 Mileage: 234187 km Time Indication: 0 Date: 2000.00.00 Time: 12:09:36 Freeze Frame: RPM: 2277 /min Speed: 119.0 km/h Load: 40.8 % Speed: 118.0 km/h (no units): 255.0 (no units): 14.0 Bin. Bits: 10000001 005784 - Please Check DTC Memory of Steering Wheel Electronics P1698 - 000 - - Intermittent Freeze Frame: Fault Status: 00100000 Fault Priority: 6 Fault Frequency: 6 Reset counter: 255 Mileage: 234187 km Time Indication: 0 Date: 2000.00.00 Time: 12:09:37 Freeze Frame: RPM: 2277 /min Speed: 119.0 km/h Load: 40.0 % Speed: 118.0 km/h (no units): 255.0 (no units): 14.0 Bin. Bits: 11000001 Further down the report I found this: Address 16: Steering wheel Labels: 1K0-953-549-MY9.lbl Part No SW: 1K0 953 549 CQ HW: 1K0 953 549 CQ Component: J0527 053 0111 Coding: 0000034 Shop #: WSC 00066 000 00000 VCID: 032B722D42D11F59C8-8056 1 Fault Found: 00895 - Cruise Control Switch (E45) 014 - Defective - Intermittent I'm new to VCDS so i figured I'd get opinions from more seasoned users. Should I replace the CC switch (the multi function switch on the left side of the steering column) or is something deeper going on here?  

Top Post Dawg

it seems the switch is going. you might want to operate the switch a couple times and see if that helps (we used to give the channel changer switch a couple ratchets which cleaned the contacts enough to watch more tv back in the day) I have a similar problem with the buttons on the other side, on the wiper stalk. does the cruise come back if you stop and restart the car? if so, you may decide you can live with the intermittent problem. there seems to be a bit of a process to remove the steering wheel and replace these modules. but there are videos around, and folks here who may provide advice if you are inclined to change it yourself. You also can use VCDS to check operation of the switches.  

quite a few have had the CC/turn signal stalk go out. I changed out my turn signal stalk a few years ago. every time I used the right turn signal the cruise control would fault out until I turned the key off then back on. the dash indication would show ' ! ' instead of the cruise control set speed. was not too hard and wrote up a little guide that I have sent to several people who also needed to change theirs. I can forward you the PM also if your planning on changing yourself.  

jetlagmech said: Here is the E-note I sent to several people. hope it helps with your steering wheel also. jetlagmech said: jetlagmech said: jetlagmech said: first tools. need a triple square for steering wheel bolt. I have the XZN-100 kit. avail on amazon but got mine thru auto parts store. I believe its called size 12. in my kit its no. 112. and need t-25 torx, type on a screwdriver handle not a tip in a socket, thats too big to fit. disconnect the battery first and touch the cables together to ensure everything is discharged, otherwise you'll get an airbag light that need VCDS to clear. steering column adjust down and all the way out. the cover behind the steering wheel use a small screwdriver to split it apart both sides close to wheel, the top piece by wheel comes up off catches then pull towards you off the catches by dash. its still connected to dash by piece of rubber sheet. just lay it up out of way. with top cover loose there are 2 torx screws now uncovered behind steering wheel you can get to by turning steering wheel and one torx screw in a recess on bottom of lower cover. after screws are out remove lower cover from around ignition switch. yes you will be putting the key in and out of switch to unlock steering wheel several times. make sure the little rubber piece from around ign switch comes out with cover and is in its slots on lower cover. didn't I tell you this was going to be longwinded !!! now your ready to remove airbag. on back side of steering wheel there are two slotted holes. easiest to get to with wheel tuned about 45 degrees. there is a metal loop in each one that has to be pried inboard toward center. I found a paint can opener worked good but it still took me 20 tries the first time to release both sides. pull the spring over and pull that edge of airbag loose a little then do the other side. the airbag fits tight and will take a little to pull it loose. there are 2 electrical connectors on airbag after it comes loose. SAFETY...set the airbag aside bag up so in case it goes off the metal mounting plate doesn't go flying. careful of static spark when going to pick it up. on installation the bag just snaps back in after hooking up the connectors. now you can see the steering wheel bolt. take it out and look for the factory marks under it to recenter your wheel on installation, mark it and slide steering wheel off. I don't have torque spec, just did it by feel on installation. now you have to pull out clockspring. to do that you have to remove the module in the way hanging on bottom of steering column. there is a little Phillips screw in front and 2 electrical connector releases, one in front and one in back. no coil of wire just solid plastic connectors. the module just comes straight down and off. the clockspring slides off now and the turn signal stalk slides out towards you. after its all back together check the wiper control before you hook up battery. after battery back in and start it have to roll all windows down and up and turn steering wheel full left and right to clear the dash lights. Now for disclaimer. I do not have Bentley manual and just did this job by looking and doing. there is probably a special tool for airbag removal. I did not mark my steering wheel and ended up removing again twice to get it centered. only took me 4 or 5 tries on airbag springs the last time . factory marks must be estimate only because they do not match on mine for steering wheel to be centered. my turn signal stalk cost me about $93 +shipping from dealer mail order. riverside VW. list price $145. good luck..... don't remember how long it took me but I was working slow and looking careful doing job. about 2 hours I think. any ?? just PM me or if during middle of job my phone is 702-712-1851 Rory good luck, its nice to have cruise control again. I was without it for 6 months. Click to expand...

Mine failed because the 'too short' yellow wire inside the harness broke. I got a new stalk from a wrecked Passat, $25 and two hours of my own labour and VOILA! I had a working cruise control again. Fixed another guy's when it broke too! Just remember to put the steering wheel on straight (line up the two notches).  

• This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register. By continuing to use this site, you are consenting to our use of cookies. Accept Learn more…

18107/P1699/005785

• 1.1 Possible Symptoms
• 1.2 Possible Causes
• 1.3 Possible Solutions
• 1.4 Special Notes

18107/P1699/005785 - Powertrain Data Bus: Missing Message from Steering Wheel Electronics

Possible symptoms.

• Malfunction Indicator Light (MIL) ON
• Cruise Control not working

Possible Causes

• Wiring and/or Connector(s) from/to Steering Wheel Electronics (J527) faulty
• Cruise Control System Switch (E45) faulty

Possible Solutions

• Check Wiring and/or Connector(s) from/to Steering Wheel Electronics (J527)
• Check/Replace Cruise Control System Switch (E45)

Special Notes

• When retrofitting Cruise Control make sure to have the Wiring done right. If you activate the Cruise Control prior to properly retrofitting the Wiring and the Cruise Control Lever/Stalk you will also find this Fault Code being stored.
• Fault Codes

Navigation menu

• Diagnostic Procedures
• Common Procedures
• Retrofitting
• Immobilizer

• Search forums

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature currently requires accessing the site using the built-in Safari browser.

• Support: (Only verified members can post)

Skoda Octavia 2009 FL cruise control retrofit

• Thread starter Comizelu
• Start date Jul 12, 2018

Verified VCDS User

Hi to all members I'm new on this forum. I own a Skoda Octavia 2009 ambient estate. I'm trying to retrofit the cruise control but I'm having some problems. I bought a used stalker and fitted. The car accepted the coding but the cruise control not working. I bought another used stalker,thinking that was faulty, fitted and still not working .ice installed the first stalker to another car, Skoda Octavia 2007,and is working fine.. This means that is something wrong with my car. I found two errors in the ecu : - 00895 cruise control switch e45 - check errors in S W module. I checked in meas blocks of cruise control and it seems to work when I turn it on, brake and acceleration. Also checked another car, same year, same model but with factory fitted cruise control. Have same S W module (1K... CQ-midline) same wiring in t20 connector. Found that error 00895 when retrofitting cruise control may be the wiring harness in ecu but can't find info of what to change in the wiring.. In 1 week I'll leave in holiday and will need it. If anyone could help me.. Will be highly appreciated Also I want to retrofit MFSW . Do I need extra wiring apart from the highline S W module?? Thank you  

Code: Monday,09,July,2018,14:59:03:16145 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x86 VCDS Version: 18.2.1.2 Data version: 20180518 DS287.1 www.Ross-Tech.com VIN: TMBHS21Z092043602 License Plate: Chassis Type: 1Z-SK35 (1K0) Scan: 01 03 08 09 15 16 17 19 25 42 44 46 52 56 62 72 VIN: TMBHS21Z092043602 Mileage: 223220km-138702miles 01-Engine -- Status: Malfunction 0010 03-ABS Brakes -- Status: OK 0000 04-Steering Angle -- Status: OK 0000 08-Auto HVAC -- Status: Malfunction 0010 09-Cent. Elect. -- Status: Malfunction 0010 15-Airbags -- Status: OK 0000 16-Steering wheel -- Status: Malfunction 0010 17-Instruments -- Status: Malfunction 0010 19-CAN Gateway -- Status: OK 0000 25-Immobilizer -- Status: OK 0000 42-Door Elect, Driver -- Status: Malfunction 0010 44-Steering Assist -- Status: OK 0000 46-Central Conv. -- Status: OK 0000 52-Door Elect, Pass. -- Status: Malfunction 0010 56-Radio -- Status: OK 0000 62-Door, Rear Left -- Status: OK 0000 72-Door, Rear Right -- Status: OK 0000 ------------------------------------------------------------------------------- Address 01: Engine Labels: 03G-906-016-BKC.clb Part No SW: 03G 906 021 TB HW: 03G 906 021 AN Component: R4 1,9l EDC G000SG 2047 Revision: --H09--- Serial number: Coding: 0000071 Shop #: WSC 66565 257 00032 VCID: 72D240D56D9030D421-8026 2 Faults Found: 001384 - Cruise Control Switch (E45) P0568 - 008 - Implausible Signal Freeze Frame: Fault Status: 01101000 Fault Priority: 0 Fault Frequency: 1 Reset counter: 255 Mileage: 223139 km Time Indication: 0 Date: 2018.07.03 Time: 21:39:01 Freeze Frame: RPM: 0 /min Speed: 0.0 km/h Load: 0.0 % Voltage: 12.08 V Bin. Bits: 11001100 Bin. Bits: 00000000 (no units): 0.0 005784 - Please Check DTC Memory of Steering Wheel Electronics P1698 - 001 - Freeze Frame: Fault Status: 01100001 Fault Priority: 0 Fault Frequency: 1 Reset counter: 255 Mileage: 223139 km Time Indication: 0 Date: 2018.07.03 Time: 21:39:02 Freeze Frame: RPM: 0 /min Speed: 0.0 km/h Load: 0.0 % Voltage: 12.08 V Bin. Bits: 11001100 Bin. Bits: 00000000 (no units): 0.0 Readiness: 0 0 0 0 0 ------------------------------------------------------------------------------- Address 03: ABS Brakes Labels:. 1K0-907-379-MK70M.clb Part No SW: 1K0 907 379 AF HW: 1K0 907 379 AF Component: MABS MK70M 0104 Revision: 00H32001 Coding: 0016641 Shop #: WSC 73430 790 00999 VCID: 76DA7CC501F82CF40D-8022 No fault code found. ------------------------------------------------------------------------------- Address 08: Auto HVAC (J301) Labels:| 3C8-907-336.clb Part No SW: 3T0 820 047 H HW: 3T0 820 047 H Component: Climatic 130 0203 Revision: 00004001 Coding: 0000000000 Shop #: WSC 73430 790 00999 ASAM Dataset: EV_Climatic A01001 ROD: EV_ClimaBasis_SK35.rod VCID: 345E86CD9F047EE4F3-8060 1 Fault Found: 9481200 - Refrigerant Pressure B10AB F0 [009] - Too Low Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 2 Fault Frequency: 1 Reset counter: 231 Mileage: 222909 km Date: 2018.06.18 Time: 00:04:38 ------------------------------------------------------------------------------- Address 09: Cent. Elect. Cannot be reached Unable to communicate with address 09. Are you sure the doors are unlocked? ------------------------------------------------------------------------------- Address 15: Airbags Labels: 1K0-909-605.lbl Part No SW: 1K0 909 605 T HW: 1K0 909 605 T Component: Q4 AIRBAG VW8 020 2300 Revision: 05020000 Serial number: 0038PD2BJSYE Coding: 0020788 Shop #: WSC 73430 790 00999 VCID: 3D48A3E9644EBFAC0C-8068 Subsystem 1 - Serial number: 6332MSME44261027/ Subsystem 2 - Serial number: 6342MSME4424415D9 No fault code found. ------------------------------------------------------------------------------- Address 16: Steering wheel Labels: 1K0-953-549-MY9.lbl Part No SW: 1K0 953 549 CQ HW: 1K0 953 549 CQ Component: J0527 053 0111 Coding: 0000034 Shop #: WSC 73430 790 00999 VCID: 033C1511422A095C3A-8056 1 Fault Found: 00895 - Cruise Control Switch (E45) 014 - Defective ------------------------------------------------------------------------------- Address 17: Instruments (J285) Labels:| 5K0-920-xxx-17.clb-SRI1 Part No SW: 1Z0 920 903 D HW: 1Z0 920 903 D Component: KOMBI H21 0109 Serial number: 00000000000000 Coding: 410B00 Shop #: WSC 73430 031 00999 ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04040 ROD: EV_Kombi_UDS_VDD_RM09_004_SK34.rod VCID: 365ABCC589786CF4CD-8062 2 Faults Found: 10485825 - Internal Control Module Memory Check Sum Error B2000 41 [137] - General checksum failure [New feature! Extended UDS fault detail is only supported by current gen. interfaces] MIL ON - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 2 Fault Frequency: 1 10485824 - Internal Control Module Memory Check Sum Error B2000 41 [137] - General checksum failure [New feature! Extended UDS fault detail is only supported by current gen. interfaces] MIL ON - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 2 Fault Frequency: 1 ------------------------------------------------------------------------------- Address 19: CAN Gateway Labels:. 1K0-907-530-V4.clb Part No SW: 1K0 907 530 S HW: 1K0 907 951 Component: J533__Gateway H16 0210 Revision: H16 Serial number: 3400K092130614 Coding: E9807F06000202002303 Shop #: WSC 73430 790 00999 VCID: 3744B1C1467295FCD6-8062 No fault code found. ------------------------------------------------------------------------------- Address 25: Immobilizer (J334) Labels:. 5K0-920-xxx-25.clb Part No SW: 1Z0 920 903 D HW: 1Z0 920 903 D Component: IMMO H21 0109 Serial number: 00000000000000 ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03004 ROD: EV_Immo_UDS_VDD_RM09.rod VCID: 365ABCC589786CF4CD-8062 No fault code found. ------------------------------------------------------------------------------- Address 42: Door Elect, Driver Labels:. 1K0-959-701-MIN3.clb Part No SW: 1T0 959 701 M HW: 1T0 959 701 M Component: Tuer-SG 008 2004 Coding: 0000756 Shop #: WSC 73430 790 00999 VCID: 41B0DF1918B6DB4C68-8014 1 Fault Found: 00109 - Left Mirror Turn Signal Lamp (L131) 012 - Electrical Fault in Circuit - Intermittent ------------------------------------------------------------------------------- Address 44: Steering Assist Labels: 1K0-909-14x-GEN3.clb Part No: 1K0 909 144 E Component: EPS_ZFLS Kl. 69 2501 Revision: 00H15000 Shop #: WSC 73430 790 00999 VCID: 2C6E9EAD8F342624AB-8078 No fault code found. ------------------------------------------------------------------------------- Address 46: Central Conv. Cannot be reached ------------------------------------------------------------------------------- Address 52: Door Elect, Pass. Labels:. 1K0-959-702-MIN3.clb Part No SW: 1T0 959 702 M HW: 1T0 959 702 M Component: Tuer-SG 008 2004 Coding: 0000756 Shop #: WSC 73430 790 00999 VCID: 42B2D0151DB0C05471-8016 1 Fault Found: 00121 - Outside Warning Light/Door exit Light Passenger Side 012 - Electrical Fault in Circuit ------------------------------------------------------------------------------- Address 56: Radio (J503) Labels:. 5M0-035-1xx-56.clb Part No SW: 1Z0 035 156 F HW: 1Z0 035 156 F Component: BOLERO 007 0040 Revision: 0A001001 Serial number: SKZ1Z3I8153674 Coding: 000004000001 Shop #: WSC 73430 790 00999 VCID: 3558BBC99C7E67ECC4-8060 No fault code found. ------------------------------------------------------------------------------- Address 62: Door, Rear Left Labels:. 1K0-959-703-GEN3.clb Part No SW: 1K0 959 703 AK HW: 1K0 959 703 AK Component: Tuer-SG 007 2001 Coding: 0000144 Shop #: WSC 73430 790 1012551 VCID: 79C077F930E6438C60-802C No fault code found. ------------------------------------------------------------------------------- Address 72: Door, Rear Right Labels:. 1K0-959-704-GEN3.clb Part No SW: 1K0 959 704 AK HW: 1K0 959 704 AK Component: Tuer-SG 007 2001 Coding: 0000144 Shop #: WSC 73430 790 1012551 VCID: 7AC268F535E0489469-802E No fault code found. End-------------------------(Elapsed Time: 01:32)--------------------------  

Hi The scan is missing the BCM coding saying it can't be reached. Can you please try deleting all faults and re-scanning the car to see if you can get a complete scan. Thanks  

myounus said: Hi The scan is missing the BCM coding saying it can't be reached. Can you please try deleting all faults and re-scanning the car to see if you can get a complete scan. Thanks Click to expand...

Comizelu said: Thanks for your reply You mean address 09 - central electrics? Will do that later on. I will try also to write back the original file into the cluster. Maybe the check sum error will disappear. Thanks again Click to expand...

Code: Monday,16,July,2018,15:04:43:16145 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x86 VCDS Version: 18.2.1.2 Data version: 20180518 DS287.1 www.Ross-Tech.com VIN: TMBHS21Z092043602 License Plate: Chassis Type: 1Z-SK35 (1K0) Scan: 01 03 08 09 15 16 17 19 25 42 44 46 52 56 62 72 VIN: TMBHS21Z092043602 Mileage: 223540km-138901miles 01-Engine -- Status: Malfunction 0010 03-ABS Brakes -- Status: OK 0000 04-Steering Angle -- Status: OK 0000 08-Auto HVAC -- Status: OK 0000 09-Cent. Elect. -- Status: Malfunction 0010 15-Airbags -- Status: OK 0000 16-Steering wheel -- Status: Malfunction 0010 17-Instruments -- Status: Malfunction 0010 19-CAN Gateway -- Status: OK 0000 25-Immobilizer -- Status: OK 0000 42-Door Elect, Driver -- Status: OK 0000 44-Steering Assist -- Status: OK 0000 46-Central Conv. -- Status: OK 0000 52-Door Elect, Pass. -- Status: OK 0000 56-Radio -- Status: OK 0000 62-Door, Rear Left -- Status: OK 0000 72-Door, Rear Right -- Status: OK 0000 ------------------------------------------------------------------------------- Address 01: Engine Labels: 03G-906-016-BKC.clb Part No SW: 03G 906 021 TB HW: 03G 906 021 AN Component: R4 1,9l EDC G000SG 2047 Revision: --H09--- Serial number: Coding: 0000071 Shop #: WSC 66565 257 00032 VCID: 72D240D56D9030D421-8026 2 Faults Found: 001384 - Cruise Control Switch (E45) P0568 - 008 - Implausible Signal Freeze Frame: Fault Status: 01101000 Fault Priority: 0 Fault Frequency: 1 Reset counter: 255 Mileage: 223543 km Time Indication: 0 Date: 2018.07.16 Time: 00:09:25 Freeze Frame: RPM: 0 /min Speed: 0.0 km/h Load: 0.0 % Voltage: 12.08 V Bin. Bits: 11001100 Bin. Bits: 00000000 (no units): 0.0 005784 - Please Check DTC Memory of Steering Wheel Electronics P1698 - 001 - Freeze Frame: Fault Status: 01100001 Fault Priority: 0 Fault Frequency: 1 Reset counter: 255 Mileage: 223543 km Time Indication: 0 Date: 2018.07.16 Time: 00:09:25 Freeze Frame: RPM: 0 /min Speed: 0.0 km/h Load: 0.0 % Voltage: 12.08 V Bin. Bits: 11001100 Bin. Bits: 00000000 (no units): 0.0 Readiness: 0 0 0 0 1 ------------------------------------------------------------------------------- Address 03: ABS Brakes Labels:. 1K0-907-379-MK70M.clb Part No SW: 1K0 907 379 AF HW: 1K0 907 379 AF Component: MABS MK70M 0104 Revision: 00H32001 Coding: 0016641 Shop #: WSC 73430 790 00999 VCID: 76DA7CC501F82CF40D-8022 No fault code found. ------------------------------------------------------------------------------- Address 08: Auto HVAC (J301) Labels:| 3C8-907-336.clb Part No SW: 3T0 820 047 H HW: 3T0 820 047 H Component: Climatic 130 0203 Revision: 00004001 Coding: 0000000000 Shop #: WSC 73430 790 00999 ASAM Dataset: EV_Climatic A01001 ROD: EV_ClimaBasis_SK35.rod VCID: 345E86CD9F047EE4F3-8060 No fault code found. ------------------------------------------------------------------------------- Address 09: Cent. Elect. (J519) Labels:. 1K0-937-08x-09.clb Part No SW: 1K0 937 084 HW: 1K0 937 084 Component: BCM PQ35 B 020 0358 Revision: 00020000 Coding: 46180AB89041B1C04010008011000024010000AE424D81605C4440000000 Shop #: WSC 73430 790 00999 VCID: 6BEC5DB18ABAE11CE2-803E Subsystem 1 - Part No: 1Z2 955 119 C Labels: 1KX-955-119.CLB Component: Wischer 11120 22 0601 Coding: 00D7B7 Subsystem 2 - Part No: 1Z0 951 171 Component: Innenraumuebe 008 5101 Subsystem 3 - Part No: 1K0 951 605 C Component: LIN BACKUP HO H03 1301 2 Faults Found: 01134 - Alarm Horn (H12) 004 - No Signal/Communication Freeze Frame: Fault Status: 01100100 Fault Priority: 4 Fault Frequency: 1 Reset counter: 246 Mileage: 223543 km Time Indication: 0 Date: 2018.07.16 Time: 00:09:25 Freeze Frame: Term 15 On Voltage: 12.00 V ON ON Term 50 Off OFF OFF 00907 - Intervention load Management 000 - - Freeze Frame: Fault Status: 01100000 Fault Priority: 6 Fault Frequency: 1 Reset counter: 246 Mileage: 223543 km Time Indication: 0 Date: 2018.07.16 Time: 00:10:15 Freeze Frame: Term 15 On Voltage: 11.95 V ON ON Term 50 Off OFF OFF ------------------------------------------------------------------------------- Address 15: Airbags Labels: 1K0-909-605.lbl Part No SW: 1K0 909 605 T HW: 1K0 909 605 T Component: Q4 AIRBAG VW8 020 2300 Revision: 05020000 Serial number: 0038PD2BJSYE Coding: 0020788 Shop #: WSC 73430 790 00999 VCID: 3D48A3E9644EBFAC0C-8068 Subsystem 1 - Serial number: 6332MSME44261027/ Subsystem 2 - Serial number: 6342MSME4424415D9 No fault code found. ------------------------------------------------------------------------------- Address 16: Steering wheel Labels: 1K0-953-549-MY9.lbl Part No SW: 1K0 953 549 CQ HW: 1K0 953 549 CQ Component: J0527 053 0111 Coding: 0000034 Shop #: WSC 73430 790 00999 VCID: 033C1511422A095C3A-8056 1 Fault Found: 00895 - Cruise Control Switch (E45) 014 - Defective ------------------------------------------------------------------------------- Address 17: Instruments (J285) Labels:| 5K0-920-xxx-17.clb-SRI1 Part No SW: 1Z0 920 903 D HW: 1Z0 920 903 D Component: KOMBI H21 0109 Serial number: 00000000000000 Coding: 410B00 Shop #: WSC 73430 031 00999 ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04040 ROD: EV_Kombi_UDS_VDD_RM09_004_SK34.rod VCID: 365ABCC589786CF4CD-8062 2 Faults Found: 10485825 - Internal Control Module Memory Check Sum Error B2000 41 [137] - General checksum failure [New feature! Extended UDS fault detail is only supported by current gen. interfaces] MIL ON - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 2 Fault Frequency: 1 10485824 - Internal Control Module Memory Check Sum Error B2000 41 [137] - General checksum failure [New feature! Extended UDS fault detail is only supported by current gen. interfaces] MIL ON - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 2 Fault Frequency: 1 ------------------------------------------------------------------------------- Address 19: CAN Gateway Labels:. 1K0-907-530-V4.clb Part No SW: 1K0 907 530 S HW: 1K0 907 951 Component: J533__Gateway H16 0210 Revision: H16 Serial number: 3400K092130614 Coding: E9807F06000202002303 Shop #: WSC 73430 790 00999 VCID: 3744B1C1467295FCD6-8062 No fault code found. ------------------------------------------------------------------------------- Address 25: Immobilizer (J334) Labels:. 5K0-920-xxx-25.clb Part No SW: 1Z0 920 903 D HW: 1Z0 920 903 D Component: IMMO H21 0109 Serial number: 00000000000000 ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03004 ROD: EV_Immo_UDS_VDD_RM09.rod VCID: 365ABCC589786CF4CD-8062 No fault code found. ------------------------------------------------------------------------------- Address 42: Door Elect, Driver Labels:. 1K0-959-701-MIN3.clb Part No SW: 1T0 959 701 M HW: 1T0 959 701 M Component: Tuer-SG 008 2004 Coding: 0000756 Shop #: WSC 73430 790 00999 VCID: 41B0DF1918B6DB4C68-8014 No fault code found. ------------------------------------------------------------------------------- Address 44: Steering Assist Labels: 1K0-909-14x-GEN3.clb Part No: 1K0 909 144 E Component: EPS_ZFLS Kl. 69 2501 Revision: 00H15000 Shop #: WSC 73430 790 00999 VCID: 2C6E9EAD8F342624AB-8078 No fault code found. ------------------------------------------------------------------------------- Address 52: Door Elect, Pass. Labels:. 1K0-959-702-MIN3.clb Part No SW: 1T0 959 702 M HW: 1T0 959 702 M Component: Tuer-SG 008 2004 Coding: 0000756 Shop #: WSC 73430 790 00999 VCID: 42B2D0151DB0C05471-8016 No fault code found. ------------------------------------------------------------------------------- Address 56: Radio (J503) Labels:. 5M0-035-1xx-56.clb Part No SW: 1Z0 035 156 F HW: 1Z0 035 156 F Component: BOLERO 007 0040 Revision: 0A001001 Serial number: SKZ1Z3I8153674 Coding: 000004000001 Shop #: WSC 73430 790 00999 VCID: 3558BBC99C7E67ECC4-8060 No fault code found. ------------------------------------------------------------------------------- Address 62: Door, Rear Left Labels:. 1K0-959-703-GEN3.clb Part No SW: 1K0 959 703 AK HW: 1K0 959 703 AK Component: Tuer-SG 007 2001 Coding: 0000144 Shop #: WSC 73430 790 1012551 VCID: 79C077F930E6438C60-802C No fault code found. ------------------------------------------------------------------------------- Address 72: Door, Rear Right Labels:. 1K0-959-704-GEN3.clb Part No SW: 1K0 959 704 AK HW: 1K0 959 704 AK Component: Tuer-SG 007 2001 Coding: 0000144 Shop #: WSC 73430 790 1012551 VCID: 7AC268F535E0489469-802E No fault code found. End-------------------------(Elapsed Time: 01:30)-------------------------- i am a locksmith and i bought this car without keys.. programmed 2 new keys.tried to write back the original but the error still on. this is the new scan after erase all dtc thanks  

The 2 dt. In the ecu , found this on ross tech website but no info about what changes to be done.. Someone could help me please.. 18106/P1698/005784 - Please Check DTC Memory of Steering Wheel Electronics Possible Symptoms Cruise Control not Working Possible Causes Fault Code stored in Steering Wheel Electronics Possible Solutions Check Steering Wheel Electronics for Fault Codes Special Notes Often seen in combination with 00895 being stored in Steering Wheel Electronics. When found after a Cruise Control Retrofit verify the 16-Steering Wheel electronics to 01-Engine control module CCS (GRA) wiring is installed and connected to the proper terminal at the Engine side. Due to the variations of the engine configurations the pin location are not standardized and the factory wiring diagrams should be used for the specific application. Thanks  

• How It Works
• Book a Mechanic Online
• About our mechanics
• Articles & Questions
• Scheduled maintenanc
• Pasadena, TX
• Oakland, CA
• Orlando, FL
• Charlotte, NC
• Chicago, IL
• San Antonio, TX
• Atlanta, GA
• Washington, DC
• Los Angeles, CA
• Phoenix, AZ
• Fleet Services
• Partner with us

• P0568 OBD-II Trouble Code: Cruise Control Set Signal Malfunction

Our certified mechanics come to you · Get a fair and transparent estimate upfront

Cost of diagnosing the P0568 code

P0568 is a diagnostic trouble code (DTC) for "Cruise Control Set Signal Malfunction". This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation. Our certified mobile mechanics can come to your home or office to perform the Check Engine Light diagnostic for $154.99 . Once we are able to diagnose the problem, you will be provided with an upfront quote for the recommended fix and receive $50.0 off as a credit towards the repair. All our repairs are backed by our 12-month / 12,000-mile warranty.

*Estimates may vary by market

P0568 code definition

Cruise Control Set Signal Malfunction

What the P0568 code means

P0568 is an OBD-II generic code that the engine control module (ECM) or body control module (BCM) identified a voltage signal for more than 90 seconds in the cruise control on/off switch or the set coast switch depending on the vehicle design.

What causes the P0568 code?

The cruise control switch circuit is shorted to power, and is sending voltage to the BCM or ECM constantly when the key is on.

What are the symptoms of the P0568 code?

• The Check Engine Light will not be illuminated but the code is set in ECM and/or BCM memory.
• The cruise control will be disabled from operating.
• The cruise control will not work.

How does a mechanic diagnose the P0568 code?

Scans codes and documents the code in the ECM and BCM, clears and verifies the code

Monitors the cruise control switch input to see if it can turn off and on

Checks the cruise control switch for a shorted switch or wiring circuit short to the ECM or BCM

Common mistakes when diagnosing the P0568 code

Not checking the cruise control on/off switch on the dash for shorts before replacing the cruise control switches on the steering wheel

Not checking the clock spring for a short before replacing the steering wheel switches

How serious is the P0568 code?

• Code P0568 will only cause the cruise control to be disabled and will not cause any drive symptoms and this code will not turn on the Check Engine Light.

What repairs can fix the P0568 code?

• Replacing the cruise control on off switch on the dash
• Replacing the cruise set switches on the steering wheel
• Repairing shorted wiring or replacing the steering clock spring if it is shorted

Additional comments for consideration regarding the P0568 code

Code P0568 will not turn on the check engine light but will set a code in memory. The only indication of the code is when the system is tested for any reason or for the cruise control not working.

need-help-with-a-p0568-code? '> Need help with a P0568 code?

YourMechanic offers certified mobile mechanics who will come to your home or office to diagnose and repair your vehicle. Get a quote and book an appointment online or speak to a service advisor at 1-800-701-6230.

No more waiting rooms! Our mechanics will come to you to diagnose and fix the P0568 code.

Get a $50 credit for the follow-up repair.

“Finding a trusted mechanic at a reasonable price can be extremely difficult. With YourMechanic you can skip the auto shop altogether. They send certified and screened mechanics straight to your door and enable you to save big on car repair and maintenance.”

– ABC NEWS

“YourMechanic will come to wherever your car is to perform any of a wide variety of car maintenance and repair services, and will charge you less than you'd normally pay if you were to drop your car off at a garage.”

– INC.

"YourMechanic will fix your car at your garage at a fixed hourly rate much lower than their brick-and-mortar counterparts."

– FOX NEWS

Related articles.

• P0021 OBD-II Trouble Code: Camshaft Position A - Timing Over-Advanced or System Performance (Bank 2)
• P0170 OBD-II Trouble Code: Fuel Trim Malfunction (Bank 1)
• P0180 OBD-II Trouble Code: Fuel Temperature Sensor A Circuit Malfunction
• P0600 OBD-II Trouble Code: Serial Communication Link Malfunction
• P0734 OBD-II Trouble Code: Gear 4 Incorrect Ratio
• P0905 OBD-II Trouble Code: Gate Select Circuit Range/Performance

Experienced Mechanic?

Recent check engine light is on inspection reviews, excellent rating, rating summary.

Christopher

More related articles, related questions, browse other content.

• Ford Taurus Maintenance
• Jeep Wrangler Maintenance
• Ford Ranger Maintenance
• Nissan Altima Maintenance
• Ford Focus Maintenance
• Timing Belt Replacement
• Battery Replacement
• Axle / CV Shaft Assembly Replacement
• Spark Plugs Replacement
• Oil Pan Gasket Replacement
• Mitsubishi repair estimates
• Volvo repair estimates
• Kia repair estimates
• Mercedes-Benz repair estimates
• Cadillac repair estimates
• Service in Orlando, FL
• Service in Atlanta, GA
• Service in Jacksonville, FL
• Service in Sunnyvale, CA
• Service in Phoenix, AZ

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · [email protected]

• Bahasa Indonesia
• Eastern Europe
• Moscow Oblast

Elektrostal

Elektrostal Localisation : Country Russia , Oblast Moscow Oblast . Available Information : Geographical coordinates , Population, Area, Altitude, Weather and Hotel . Nearby cities and villages : Noginsk , Pavlovsky Posad and Staraya Kupavna .

Information

Find all the information of Elektrostal or click on the section of your choice in the left menu.

• Update data

Elektrostal Demography

Information on the people and the population of Elektrostal.

Elektrostal Geography

Geographic Information regarding City of Elektrostal .

Elektrostal Distance

Distance (in kilometers) between Elektrostal and the biggest cities of Russia.

Elektrostal Map

Locate simply the city of Elektrostal through the card, map and satellite image of the city.

Elektrostal Nearby cities and villages

Elektrostal weather.

Weather forecast for the next coming days and current time of Elektrostal.

Elektrostal Sunrise and sunset

Find below the times of sunrise and sunset calculated 7 days to Elektrostal.

Elektrostal Hotel

Our team has selected for you a list of hotel in Elektrostal classified by value for money. Book your hotel room at the best price.

Elektrostal Nearby

Below is a list of activities and point of interest in Elektrostal and its surroundings.

Elektrostal Page

• Information /Russian-Federation--Moscow-Oblast--Elektrostal#info
• Demography /Russian-Federation--Moscow-Oblast--Elektrostal#demo
• Geography /Russian-Federation--Moscow-Oblast--Elektrostal#geo
• Distance /Russian-Federation--Moscow-Oblast--Elektrostal#dist1
• Map /Russian-Federation--Moscow-Oblast--Elektrostal#map
• Nearby cities and villages /Russian-Federation--Moscow-Oblast--Elektrostal#dist2
• Weather /Russian-Federation--Moscow-Oblast--Elektrostal#weather
• Sunrise and sunset /Russian-Federation--Moscow-Oblast--Elektrostal#sun
• Hotel /Russian-Federation--Moscow-Oblast--Elektrostal#hotel
• Nearby /Russian-Federation--Moscow-Oblast--Elektrostal#around
• Page /Russian-Federation--Moscow-Oblast--Elektrostal#page
• Terms of Use
• Copyright © 2024 DB-City - All rights reserved
• Change Ad Consent Do not sell my data

Current time by city

For example, New York

Current time by country

For example, Japan

Time difference

For example, London

For example, Dubai

Coordinates

For example, Hong Kong

For example, Delhi

For example, Sydney

Geographic coordinates of Elektrostal, Moscow Oblast, Russia

City coordinates

Coordinates of Elektrostal in decimal degrees

Coordinates of elektrostal in degrees and decimal minutes, utm coordinates of elektrostal, geographic coordinate systems.

WGS 84 coordinate reference system is the latest revision of the World Geodetic System, which is used in mapping and navigation, including GPS satellite navigation system (the Global Positioning System).

Geographic coordinates (latitude and longitude) define a position on the Earth’s surface. Coordinates are angular units. The canonical form of latitude and longitude representation uses degrees (°), minutes (′), and seconds (″). GPS systems widely use coordinates in degrees and decimal minutes, or in decimal degrees.

Latitude varies from −90° to 90°. The latitude of the Equator is 0°; the latitude of the South Pole is −90°; the latitude of the North Pole is 90°. Positive latitude values correspond to the geographic locations north of the Equator (abbrev. N). Negative latitude values correspond to the geographic locations south of the Equator (abbrev. S).

Longitude is counted from the prime meridian ( IERS Reference Meridian for WGS 84) and varies from −180° to 180°. Positive longitude values correspond to the geographic locations east of the prime meridian (abbrev. E). Negative longitude values correspond to the geographic locations west of the prime meridian (abbrev. W).

UTM or Universal Transverse Mercator coordinate system divides the Earth’s surface into 60 longitudinal zones. The coordinates of a location within each zone are defined as a planar coordinate pair related to the intersection of the equator and the zone’s central meridian, and measured in meters.

Elevation above sea level is a measure of a geographic location’s height. We are using the global digital elevation model GTOPO30 .

Elektrostal , Moscow Oblast, Russia